Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• If you usually use your mobile phone with your right hand, wear the headset on your right ear. • Covering your headset or device could effect its performance so keep contact to a minimum. Turning the headset on or off To turn the headset on Slide up the power switch.The blue indicator light flashes 4 times. To turn the headset off Slide down thepower switch. The indicator light flashes blue and red then turns off. English 9 Pairing and connecting the headset Pairing and connecting the headset Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In Pairing mode, two devices should be placed close enough to each other. Pairing and connecting the headset with a phone 1 Enter Pairing mode. • With the headset turned on, press and hold the Talk button for 3 seconds. The blue indicator light stays lit. • Iftheheadsetisturnedonforthefirsttime,itwillgointoPairingmode immediately and the Pairing mode stays for 3 minutes. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1200) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a Bluetooth device without requesting a PIN. This feature is available for devices that are compliant with Bluetooth version 2.1 or higher. 10 The headset can also be paired via the Active pairing feature, see page 13. Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. 1 Connect with the first Bluetooth phone. 2 Press and hold the Talk button for 3 seconds to enter Pairing mode. 3 Press and hold the Volume up button to activate Multi-point feature. 4 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone’s user manual). 5 Select the headset (HM1200) from the list of devices found by the second Bluetooth phone. 6 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the second Bluetooth phone. 7 Reconnect to the headset from the first Bluetooth phone. When connecting the headset to 2 Bluetooth phones, some phones may not be able to connect as a second Bluetooth phone. English 11 To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. The blue indicator light flashes twice and you will hear a beep. To turn Multi-point feature off In Pairing mode, press and hold the Volume down button. The red indicator light flashes twice and you will hear a beep. Disconnecting the headset Turn off the headset or use the Bluetooth menu on your phone to remove the device from your pairing list. Reconnecting the headset If the headset loses the connection to the paired phone, • Press the Talk button on the headset or use the Bluetooth menu on your phone. Your headset will attempt to automatically reconnect each time you turn it on. This feature may be unavailable on some phones. If the Multi-point feature is activated, your headset will attempt to reconnect to the two most recently connected devices. EnglishPairing via the Active pairing feature With the Active pairing feature, your headset automatically looks for a Bluetooth device and tries to make a connection with it. EnglishPairing via the Active pairing feature With the Active pairing feature, your headset automatically looks for a Bluetooth device and tries to make a connection with it. This feature is available for mobile phones, but the phone’s Bluetooth visibility option must be set to on. 1 In Pairing mode, press and hold the Talk button to enter Active pairing mode. To enter Pairing mode, see page 10. 2 The violet indicator light turns on and the headset will search for a Bluetooth phone within your phone’s range, and attempt to pair with it. • Ensure the phone you wish to connect to is within range of the headset. Place the headset and phone close to each other to avoid pairing with other devices. • The headset will attempt active paring for up to 20 seconds. • The Bluetooth phone you want to connect with must not be paired with other devices. If the phone is already connected to another device, end the connection and restart the Active pairing feature. • This feature may not be available on some devices. 13 Using call functions Using call functions Available call functions may differ from phone to phone. Making a call Redialling the latest number To redial the latest number on the primary phone, • Press the Talk button. To redial the latest number on the secondary phone, • Press the Talk button twice. For some phones, pressing the Talk button opens the call log list. Press the Talk button again to dial the selected number. Dialling a number by voice Press and hold the Talk button and say a name. • This function i...