Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Philips Dateigröße: 1.46 mb Dateiname: Unterrichtssprache:

Warning Changes or modifications made to this equipment not expressly •• approved by Philips may void the FCC authorization to operate this equipment. Note FCC/IC Radiation Exposure Statement: This equipment complies •• with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction •• with any other antenna or transmitter. Philips Consumer Lifestyle A division of Philips Electronics North America Corporation P.O.Box 10313 Stamford, CT 06904 Phone: 1-888-PHILIPS (744-5477) Notice for Canada Operation is subject to the following two conditions: a This device may not cause interference3 and b This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC:” before the certification / registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N.V. is under license. 2 Your bluetooth stereo headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With the Philips Bluetooth stereo headset SHB6000, you can enjoy convenient wireless hands-free call. Ergonomically designed soft ear bud provides all-day wearing comfort. You can simply recharge your headset on your computer or with a USB charger. Spend a few minutes to learn more about your headset to enjoy your Philips Bluetooth stereo headset to its fullest. What’s in the box Check and identify the contents of your package: Bluetooth headset• USB charging cable • Exchangeable rubber ear caps• Quick start guide• Pouch• Compatibility Your headset is compatible with Bluetooth enabled mobile phones. It features Bluetooth version 2.1. It also works with devices featuring other Bluetooth versions that support the Headset profile (HSP), A2DP-Advanced Audio Distribution Profile, Hands-free profile (HFP) and Audio/Video remote control profile (AVRCP). Exchangeable ear capsPower on/offMicLEDAdjustable ear hookCharging socketENQuick Start GuidePhilips Bluetooth stereo headset SHB6000 Overview of your Bluetooth stereo headset Exchangeable ear capsPower on/offMicLEDAdjustable ear hookCharging socket 3 Get started Charge the headset Warning Before you use your headset for the first time, charge the battery for •• four hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage.•• Finish your call before charging the headset, as connecting the headset •• for charging will power off the unit. You can operate the headset normally during charge.•• 1 Remove the USB cap. 2 Plug the headset into a powered USB port with USB charging cable. LED turns red during charge and turns off when the headset »» is fully charged. Tip Typically, a full charge takes two hours.•• Pair the headset with your mobile phone Before you use the headset with a mobile phone for the first time, pair it with the mobile phone. A successful pairing establishes a unique encrypted link between the headset and the mobile phone. The headset stores the last three links in the memory. If you try to pair more than three devices, the link for the earliest paired device is overwritten. 1 Ensure that the mobile phone is turned on and its Bluetooth feature is activated. 2 Ensure that the headset is charged and turned off. 3 Press until the LED starts flashing red and blue alternately. Do not stop pressing the button after seeing the blue LED only. The headset is in pairing mode, which lasts five minutes.»» 4 Pair the headset with the mobile phone. For details, refer to the user manual of the mobile phone. A sample pairing is shown below. 1 Under Bluetooth menu on the mobile phone, search for the headset. 2 On mobile phones using Bluetooth 2.1 or higher, you do not need to enter a pass code. 3 From the found devices, select Philips SHB6000. Enter “• 0000” (4 zeros), if prompted to enter the pin code of the headset. SettingsSelectBackConnectivity10:37Enter Password**** 0000SettingsBluetoothSelectBackConnectivity10:35AddBluetoothdeviceSettingsDevices FoundSelectBack10:36Philips SHB6000 4 Use the headset Connect the headset to your mobile phone 1 With the mobile phone turned on, press until the LED lights up, to turn on the headset. Once turned on, the headset reconnects automatically to »» the last device it was connected to. If the last connected device is not available, the headset »» tries to reconnect to...

Herunterladen

Geben Sie zwei Ziffern: