Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: VXI Dateigröße: 358.89 kb Dateiname: Unterrichtssprache:

2. The next window asks “What do you want Windows to search?” Select “Search for the best driver for your device.” Click Next. 3. The next window asks “Where do you want Windows to search?” Select the hard drive only with the default location in the text box (either “c:\Windows”, or “c:\Windows\Options\Cabs” depending on your PC.) Click Next. 4. The next window states: Windows will now install the driver for “USB Composite Device.” Click Next. 5. Click Finish. 3. Windows Add New Hardware Wizard - Second Pass - USB Human Interface Device The second pass of the Add New Hardware Wizard detects a USB Human Interface Device. This portion of the installation proceeds like the first, replacing “USB Composite Device” with “USB Human Interface Device.” 4. Windows Add New Hardware Wizard - Third Pass - USB Audio Device The third pass of the Add New Hardware Wizard detects a USB Audio Device. This portion of the installation proceeds like the first, replacing “USB Composite Device” with “USB Audio Device.” The Windows drivers have now been installed. 5. Macintosh Users Note: Plug the VXI Parrott® Digital USB Headset directly into your Mac’s USB port, not the keyboard USB hub. 1. Configure the Microphone Control Strip Click on the micrphone icon on the control strip. In the pop-up menu, click on USB Audio. Do the same for the speaker icon. 2. Configure the Sound Control Panel Open the Sound Control Panel and select Input. Verify that USB Audio is selected as the sound input source. If is not selected, click on USB Audio in the list. Do the same for the Output for the sound output. Close the Sound Control Panel. For installation verification or troubleshooting, please refer to the Troubleshooting section of the Parrott® Digital USB Headset User Guide PDF file on the VXI website at Installation Verification and Troubleshooting To verify the installation or for troubleshooting tips, please refer to the Parrott® Digital USB Headset User Guide documentation on VXI Corporation’s website, at Using the Parrott® Digital USB Headsets Swivel Adjusting the Microphone The microphone boom can be positioned on either side of your mouth by rotating the headset and swiveling the boom. For the Parrott® Caribbean, note that the normal Left/Right stereo is designed for the microphone to be on the right side of your mouth; with the microphone located on the left side, the channels will be reversed. When the microphone boom is adjusted to your liking, be sure that the word “TALK” engraved on the microphone housing faces your mouth. Adjust the microphone so that it is positioned about one finger-width away from the corner of your mouth. Quick Disconnect Controls The Quick Disconnect pendant provides a push on/push off button for muting the microphone. Push the button in to activate the microphone. Push the button again so it is out to mute the microphone. To adjust the volume in the earphone(s), rotate the volume control as shown above. Speech Recognition Applications Your VXI Parrott® Digital USB Headset will work as is with all major speech recognition software applications from leading vendors including IBM, Dragon Systems, and Lernoud & Hauspie. Voice Over the Internet (VoIP) Applications IMPORTANT! To activate your VXI Parrott® Digital USB Headset for Internet telephone calls, visit the VXI website at ...

Herunterladen

Geben Sie zwei Ziffern: