Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
40 80 120 160 200 A. Keep open flames away from the area where fuel is handled or stored. • Mix and store fuel only in an approved gasoline container. Note: Most engine troubles are caused, directly or indirectly, by the fuel used on the machine. Take special care not to mix a motor oil for 4 cycle engines. 25 : 1 gfUXI_ flare (i) 12345 240IM £8! (ml) 40 80 120 160 200 A. • as flirt 9H ^a|£. • as^ sy ^Hsoiife. »a scares s?i* ^A|£. ^■o| : cflifesi a!S2SS 2j • zis sire sy *H£re s* ass AlgsfeOM b|*au|CL S*| 4Af OIM cHjjqg HE|2gJ2| ■ CHAIN OIL Use motor oi: SAE #10W-30 all year round or SAE #30~#40 in summer and SAE #20 in winter. Note: Do not use wasted or regenerated oil that can cause damage to the oil pump. ■«iieiaai 2i§ SAE #10W~30 HE|2gJ® A^*m , ^5| OlSOflt SAE #30"-#40, 7lS0)|fe SAE #20# AfgsfOl ^4|A|2. ^2| . b||o4 X|(^ofe £&£ SIS 2JO.SS A^s|- X| °f0|- ^A|S. 9 English 5. Operating Engine ■ STARTING ENGINE 1. Fill fuel and chain oil tanks respectively, and tighten the caps securely. (F7) 2. Put the switch to “I” position. (F8) (1) Chain oil (2) Fuel (3) Switch (4) Throttle lever (5) Throttle interlock 3. Pull out the choke knob to the second-stage position. The choke will close and the throttle lever will then be set in the starting position [F10-(a)]. (6) Choke knob 4. While holding the saw unit securely on the ground, pull the starter rope vigorously. (F11) 5. When engine has ignited first, puch in the choke knob to the first-stage position and pull the starter again to start the engine. 6. Allow the engine to warm up with the throttle lever pulled slightly. ■ CHECKING OIL SUPPLY After starting the engine, run the chain at medium speed and see if chain oil is scattered off as shown in the figure. (F12) (1) Chain oil m 5. ■°jj£!°l 7|5 l.asaf *II2J£ÎIS zfzf i^hoii *H*ni as 99*i ÉhSrMch (nü-7) 2.2!!2^iN*l* sBi “ I ” 3*|