Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Stihl, modell TB4516CC

Hersteller: Stihl
Dateigröße: 28.06 mb
Dateiname: 42964837-bae1-8f04-4996-f65140e0ed92.pdf
Unterrichtssprache:enesfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


A 3-wire extension cord (an extension cord with a ground) that uses a NEMA type connector (parallel blade, U ground) is recommended. Extension cords are available from your local retailer. Use only round- jacketed extension cords approved for outdoor use. • This tool is double-insulated. Repair or replace damaged cords. • To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider than the other). This unit will fit with a polarized plug in one way only. If the plug does not fit fully into the unit, reverse the plug. If it still does not fit, use a cord with the correct connection. Do not modify the unit in any way. To reduce the risk ofWARNING: electrical shock, use only SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A cord types. RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION ELECTRICAL SAFETY WARNINGS (CONT’D) • CORD SETS: Make sure your cord set is in good condition, with a cord that is heavy enough to carry the current that your unit will draw. An undersized cord set will cause a drop in line voltage resulting in a loss of power, as well as overheating. The table shown above illustrates the correct size to use depending on the cord length and nameplate amperage rating. If in doubt, use the next heavier size line gauge. The smaller the gauge number, the heavier the cord. To prevent the cord from disconnecting from the unit, use the cord hook shown in the Operating Instructions. • Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) that will be used for the unit. Use receptacles with built-in GFCI protection for an extra measure of safety. • Avoid dangerous environments. Never operate your unit in damp or wet conditions. Moisture is a shock hazard. • Inspect all extension cords and the unit power connection periodically. Look closely for deterioration, cuts or cracks in the insulation. Also inspect the connections for damage. Repair or replace the cords if any defects appear. • Do not handle the plug or the unit with wet hands. • Examine the electrical switches. Do not use the chain saw if the switches do not properly turn on and off. Do not attempt to make any repairs to the electric switches. Take your saw to an Authorized Service Center. • Keep the cord away from the cutting area and to position cord so that it will not be caught on branches, and the like, during cutting. • Use an extension cord heavy enough to carry the current the tool will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. • This electric powered saw is classified by CSA as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an anti-vibration feature. Minimum Gauge Wire Saw Model Ampere Rating Volts AC Length of Power Cord 25 ft. / 7.5m 50 ft. / 15m 100 ft. / 30m TB3516 TB4516 13.5 15 110 / 120 16 Gauge 16 Gauge 14 Gauge 110 / 120 14 Gauge 12 Gauge Not Recommended SAVE THESE INSTRUCTIONS RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. • WARNING - READ OPERATOR'S MANUAL Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. • WEAR EYE, HEARING AND HARDHAT PROTECTION WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit. Wear a hard hat. Use a full face shield when needed. • DO NOT USE IN THE RAIN WARNING: Avoid dangerous environments. Never operate your unit in the rain, or in damp or wet conditions. Moisture is a shock hazard. SYMBOL MEANING • GUIDE BAR WARNING: Contact of the guide bar tip with any object should be avoided. Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. • USE BOTH HANDS Always use both hands while operating the chain saw. Never use only one hand to operate the saw. Avoid bar nose contact. • DOUBLE INSULATED Two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to this unit. RULES FOR SAFE OPERATION KNOW YOUR UNIT RULES FOR SAFE OPERATION KNOW YOUR UNIT 16 14 9 11 15 2 18 20 21 19 5 10 1...

Dieses Handbuch ist für folgende Modelle:
Kettensägen - TB4516CC (28.06 mb)
Kettensägen - TB4516CC (28.06 mb)
Kettensägen - TB4516CC (28.06 mb)
Kettensägen - TB4516CC (28.06 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien