Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Craftsman Dateigröße: 3.35 mb Dateiname: 1c3f0eaf-4b13-6ff4-250e-f37d39358d5f.pdf Unterrichtssprache:

• To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider than the other). This unit will fit with a polarized plug in one way only. If the plug does not fit fully into the unit, reverse the plug. If it still does not fit, use a cord with the correct connection. Do not modify the unit in any way. To reduce the risk of WARNING: electrical shock, use only SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A cord types. 5 RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION ELECTRICAL SAFETY WARNINGS (CONT’D) • CORD SETS: Make sure your cord set is in good condition, with a cord that is heavy enough to carry the current that your unit will draw. An undersized cord set will cause a drop in line voltage resulting in a loss of power, as well as overheating. The table shown below illustrates the correct size to use depending on the cord length and nameplate amperage rating. If in doubt, use the next heavier size line gauge. The smaller the gauge number, the heavier the cord. To prevent the cord from disconnecting from the unit, use the cord hook shown in the Starting/Stopping Instructions. • Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) that will be used for the unit. Use receptacles with built-in GFCI protection for an extra measure of safety. • Avoid dangerous environments. Never operate your unit in damp or wet conditions. Moisture is a shock hazard. • Inspect all extension cords and the unit power connection periodically. Look closely for deterioration, cuts or cracks in the insulation. Also inspect the connections for damage. Repair or replace the cords if any defects appear. • Do not handle the plug or the unit with wet hands. • Examine the electrical switches. Do not use the chain saw if the switches do not properly turn on and off. Do not attempt to make any repairs to the electric switches. Take your saw to a Sears or other qualified service dealer. • Keep the cord away from the cutting area and to position cord so that it will not be caught on branches, and the like, during cutting. • This electric powered saw is classified accroding to CAN/CSA Z62.1-03 as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an anti-vibration feature. Minimum Gauge Wire Saw Model Ampere Rating Volts AC Length of Power Cord 25 ft. / 7.5m 50 ft. / 15m 100 ft. / 30m 34107 13.5 110 / 120 16 Gauge 16 Gauge 14 Gauge SAVE THESE INSTRUCTIONS 6 RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. • READ OPERATOR'S MANUAL WARNING: Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. • WEAR EYE, HEARING AND HARDHAT PROTECTION WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit. Wear a hard hat. Use a full face shield when needed. • DO NOT USE IN THE RAIN WARNING: Avoid dangerous environments. Never operate your unit in the rain, or in damp or wet conditions. Moisture is a shock hazard. SYMBOL MEANING • GUIDE BAR WARNING: Contact of the guide bar tip with any object should be avoided. Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. Avoid bar nose contact. • USE BOTH HANDS Always use both hands while operating the chain saw. Never use only one hand to operate the saw. • DOUBLE INSULATED Two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to this unit. 7 16 9 11 15 10 1 8 7 14 RULES FOR SAFE OPERATION KNOW YOUR SAW 2 18 19 5 4 6 3 12 13 17 16 9 11 15 10 1 8 7 14 RULES FOR SAFE OPERATION KNOW YOUR SAW 2 18 19 5 4 6 3 12 13 17 CHAIN SAW COMPONENTS 1. REAR HANDLE 2. OIL RESERVOIR CAP 3. TRIGGER START/STOP SWITCH 4. SPROCKET COVER 5. BAR BOLT KNOB 6. CHAIN TENSION RING 7. ELECTRIC MOTOR 8. ELECTRIC CORD 9. CHAIN BRAKE® LEVER / HAND GUARD 10. LOCK / OFF BUTTON 11. FRONT HANDLE 12. GUIDE BAR 13. SAW CHAIN 14. BUCKING SPIKES 15. CORD RETAINER HOLE 16. SPROCKET TIP 17. OIL RESERVOIR WINDOW 18. CORD RETAINER 19. CHAIN CATCHER SAFETY FEATURES Numbers preceding the desc...

Herunterladen

Geben Sie zwei Ziffern: