Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Remington Dateigröße: 3.35 mb Dateiname: ded31724-1af7-4417-8849-d426e71bef7b.pdf Unterrichtssprache:

Service When servicing, use only identical replacement parts. Storage When not in use, always store saw • with battery removed • in a high or locked place, out of children’s reach • in a dry place • with scabbard over guide bar • indoors Save these instructions. It is your guide to safe and proper operation of this saw. POLESAW TRIMMING PRECAUTIONS Never stand directly under the limb you are trimming. Always position yourself out of the path of falling debris. Never stand on a ladder or other type of unstable support while using the polesaw. Always use both hands to operate polesaw. Keep a firm, steady pressure on the polesaw while cutting but do not try to force the saw through the wood. Do not use the polesaw to cut limbs larger in diameter than the length of the guide bar. Keep other persons away from cutting end of polesaw and at a safe distance from work area. Do not use polesaw near cable, electric power or telephone lines. Maintain a minimum clearance of 10 feet from all power lines. IMPORTANT: Read and understand this manual before assembling or operating this chain saw. Improper use of saw can cause severe injury. Keep this manual for future reference. UNPACKING 1. Remove all items from carton. 2. Check all items for any shipping damage. If you find any damage or if any parts are missing, promptly inform dealer where you bought chain saw. 6 PRODUCT IDENTIFICATION ENGLISH CHAIN SAW Guide Bar Saw Chain Guide Bar Nose Rear Handle Battery Front Hand Guard Scabbard Sprocket Cover Handle Release Button Battery Release Button Trigger Trigger Lockout Front Handle Spike Battery Release Button Handle Release Button Power Head Saw Chain Hand Guard Guide Bar Inner Pole Clamping Lever Outer Pole Trigger Lockout Grip Area Trigger Handle Handle Release Button Battery Release Button Battery Handle Release Button Power Head POLESAW 7 CHAIN SAW TERMS AND DEFINITIONS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Handle Located at front of saw body. Front Hand Guard Shield between front handle and guide bar. Protects left hand while using saw. Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain. Guide Bar Nose Tip or end of guide bar. Inner Pole The moveable section of tubing to which the saw is attached. Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator. Limbing Process of cutting limb(s) from a felled tree. Low-Kickback Chain Chain that reduces chance of kickback as required by ANSI B175.1. Normal Cutting Position Stance used while making bucking and felling cuts. Notching Cut Notch cut in tree that directs fall of tree. Outer Pole Retains the moveable inner pole. Power Head Chain saw without chain and guide bar. Also known as saw body. Pushback (Kickback, Pinch) Rapid pushback of chain saw. Pushback may occur if chain along top of guide bar is pinched, caught, or contacts a foreign object. Rear Handle Handle located at rear of saw body. Reduced Kickback Guide Bar Guide bar that reduces chance of kickback. Replacement Chain Chain that complies with ANSI B175.1 when used with a specifi c saw. It may not meet ANSI requirements when used with other saws. Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain. Spiked Bumper (Spike) Pointed teeth at front of saw body beside guide bar. Keep spiked bumper in contact with wood when felling or bucking. It helps maintain position of saw while cutting. Sprocket Toothed wheel that drives chain. Switch Device that completes or interrupts electrical circuit to motor of saw. Switch Linkage This device connects switch to trigger. It moves switch when you squeeze trigger. Trigger Lockout Device that reduces accidental starting of saw. Trigger Device that turns saw on and off. Squeezing trigger turns saw on. Releasing trigger turns saw off. Trimming (Pruning) Process of cutting limb(s) from a living tree. Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar. 8 RECHARGEABLE BATTERY PROTECTIVE BATTERY TERMINAL CAP WARNING: Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, jewelry etc. without battery cap. A protective battery terminal cap is provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool. SAFETY WARNINGS 1. This manual contains important safety and operating instructions. 2. Befor...

Herunterladen

Geben Sie zwei Ziffern: