Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Orion Car Audio Dateigröße: 637.39 kb Dateiname: ad6dd2b6-9911-4fa1-8cdd-9fcb2490a07e.pdf Unterrichtssprache:

(1) Amplifier installation and operation manual . (1) Window decal IMPORTANT NOTE Prior to servicing your vehicle ensure that the alarm system is disarmed. Due to the amplifier’s anti-theft feature (if enabled), if the main power to the amplifier is removed while the security system is armed the amplifier operation is disabled. To reset the amplifier, refer to Appendix—Programmable Features. © 2005 Directed Electronics, all rights reserved PRACTICE SAFE SOUND™ Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure. RECORD YOUR SERIAL NUMBER AND DATE To ensure your warranty (see back cover), please record the following information regarding your new amplifier. Model: __________________________________________________ Serial Number: __________________________________________________ Date of Purchase: __________________________________________________ Purchased from: __________________________________________________ END PANEL LAYOUTS 1 2 3 4 5 6 789101112 POWER INPUT LINE OUT ESP PORT (GREEN) L CH L CH GAIN INFRASONIC HPF INTELLI-Q LPF REMOTE PHASE PROTECT (RED) MASTER SLAVE ON OFF MIN MAX 20Hz 150Hz MIN MAX 30Hz 250Hz O. 180. ESP INDICATOR (YELLOW ) R CH R CH 1. RCA Input -accepts RCA input from a head unit, preamplifier, or equalizer. 2. RCA Line Output -provides easy connection to additional amplifiers. 3. Master/Slave Switch -controls whether the amplifier is a slave or master when connected in combined amplifier configurations. (Refer to the Combined Amplifiers section of this guide.) 4. Gain Control -continuous adjustment for full power output. 5. Infrasonic Switch -when On cuts off extremely low bass frequencies (below the range of human hearing, that speakers cannot effectively reproduce). The high pass filter is engaged when the infrasonic switch is On. This improves efficiency of the amplifier’s power supply, improves sound reproductive performance, and reduces chances of damaging the subwoofers. 6. High-Pass Frequency Control -adjusts the frequency of the high-pass crossover. 7. INTELLi Q Control -continuously adjusts the "Q" boost of the high-pass crossover from 0 to 10dB of boost. 8. Low-Pass Frequency Control -adjusts the upper crossover frequency of the amplifier. 9. Remote Bass Jack -connects optional HP-RB1 remote bass control to control the bass level from the driver’s seat. © 2005 Directed Electronics, all rights reserved 10. Phase Control Switch - provides either 0 or 180 degree phase shift of the amplified output (speaker) with respect to the input signal to facilitate bridging of amplifiers. 11. Power LED -when illuminated (green) indicates that the amplifier is on. Protect LED -when illuminated (red) indicates that the amplifier protective circuitry has been activated due to thermal, output short, supply undervoltage or supply overvoltage. ESP® Indicator LED -when illuminated (yellow) indicates ESP® functionality and is used to diagnose ESP® features. The LED flash characteristics will assists in diagnosing the type of fault (see Appendix). NOTE: The LED on top of the amplifier may also illuminate and flash with the ESP® LED indicator, if this option has been enabled by your installer (requires Bitwriter®). 12. ESP® Port -connection port for Bitwriter® or ESP2 security system. HCCA-D1200 1 234 5 SPEAKER + + --+BAT REM GND FUSE HCCA-D2400 1 234 5 SPEAKER + + --+BAT REM GND FUSE HCCA-D5000 2 34 234 5 SPEAKER + + --+BAT REM GND +BAT REM GND 1. ATC Fuse -this fuse(s) protects the amplifier against internal electrical damage and is meant to protect the amplifier only. All other power connections should be fused at the source. The HCCA-D1200 has two 30-amp fuses. The HCCA-D2400 has three 40-amp fuses. The HCCA-D5000 has one inline 250-amp fuse. © 2005 Directed Electronics, all rights reserved 2. +BAT -connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery. WARNING: Always protect this power wire by installing a fuse or circuit breaker of the appropriate size within 12 inches of the battery terminal connection. 3. REM -this terminal turns on the amplifier when (+) 12 volt is applied. Connect it to the remote turn on lead of the head unit or signal source. If a (+) 12 volt remote turn lead is not available, a Remote Power Adapter (P/N #55000) can be used to supply a remote turn on signal. DO NOT connect this terminal to constant (+) 12 volt. 4. GND -power return connection. Connect this terminal directly to the sheet metal chassis of the vehicle, using the shortest wire necessary to make this connection. Always use wire of the same gauge or larger than the (+) 12 volt power wire. The chassis connection point should be scraped free of paint and dirt. Use only qualit...

Herunterladen

Geben Sie zwei Ziffern: