Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Carefully read and follow the guidelines in this manual giving special attention to the CAUTION and WARNING statements. Keep this manual for reference should troubleshooting be necessary. CAUTION statements provide information that could damage your inverter or equipment connected to it. WARNING statements provide information on conditions that could result in personal injury or loss of life. WARNING: Incorrect installation or misuse of the RPPD100D could result in personal injury or damage to the inverter and/or attached equipment. Read and follow the directions in the owner’s manual. The ROADPRO RPPD100D produces the same potentially lethal AC power as normal household outlets. It is suggested that you treat it with the same respect that you would any AC outlet. WARNING: SHOCK HAZARD, KEEP AWAY FROM CHILDREN. DO NOT insert any foreign objects into the RPPD100D’s outlets, vents or fan openings. DO NOT expose the RPPD100D to rain, water or any other liquids. DO NOT connect the RPPD100D to utility power distribution systems or branch circuits. WARNING: HEATED CASE AND SURFACE. The case to the RPPD100D may become very warm under high power operation reaching 140°F. Be sure that there is at least 4 inches of unobstructed air space around the entire surface of the inverter at all times. During use, DO NOT place materials that could be damaged by heat on or near the RPPD100D. WARNING: EXPLOSION HAZARD. DO NOT operate the RPPD100D near flammable fumes or gases such as the bilge of a gasoline power boat or near propane tanks. DO NOT operate the RPPD100D in an enclosed area that contains automotive type lead-acid batteries. This type of battery emits explosive hydrogen gas which can be ignited by sparks. CAUTION: DO NOT connect any AC device which has its neutral conductor connected to ground. DO NOT expose the RPPD100D to air temperatures in excess of 104°F. DO NOT use the RPPD100D on the following items: 1. Small battery-operated appliances such as flashlights, razors and nightlights that can be plugged directly into an AC outlet to recharge. 2. Certain battery chargers for battery packs used in hand power tools. These chargers will have a “Warning Label” indicating that dangerous voltages are present at the battery terminals. RPPD100D Waveform Output: The output waveform of your RPPD100D is referred to as “square wave” or “modified sine wave.” Some very sensitive electronic equipment and some medical equipment (listed below) may not operate satisfactorily on “square wave” or “modified sine wave.” It is a stepped waveform designed to have characteristics similar to the pure sine wave shape of utility power. A waveform of this nature is suitable for most AC loads (including linear and switching power suppliers used in electronic equipment, transformers and motors). The problems described above, do not occur with most battery-operated equipment. The vast majority of these items use a separate charger or transformer that plugs into the AC outlet and produces a low voltage output. If the label on your adapter states that it produces a low voltage (AC or DC) output (30 volts or less) then the RPPD100D will operate the item safely. Some of the following items may not operate properly on a “square wave” inverter. If you have any questions, contact the device’s manufacturer. • Laser printers, photocopiers, magneto-optical hard drives. • Certain laptop computers. • Some battery chargers for cordless tools and razors. • Digital clocks with radios. INSTALLATION: Insert plug into your vehicle’s cigarette lighter socket or accessory power port. NOTE: Make sure the cigarette lighter, or power port socket is clean and provides a tight fit for the plug. For safety, unplug the RPPD100D when not in use. Operating Indicators: Green LED Indicator on top of your inverter will light to indicate power to your inverter. Current Overload Protection: If the inverter is overloaded, it will shut down to protect itself. To restore normal operation, disconnect the excessive load and turn the unit Off and disconnect the plug. Low Voltage Protection: If the input voltage drops to 10.5V or less, the inverter will shut down to protect the battery. To restore normal operation, return the DC input voltage to at least 12V. The inverter will automatically return to normal operation. High Voltage Protection: If the DC input voltage rises above 15 volts, the inverter will shut down to protect itself. To restore normal operation, return the DC input voltage to less than 15 volts. The inverter will automatically return to normal operation. CAUTION: Although the inverter has protection against over-voltage, it may still be damaged if the input voltage were to exceed 16 volts. Over Temperature Protection: If the inverters internal temperature rises to 104.F, the inverter will shut down to protect itself. NOTE: Internal inverter temperature can rise due to being operated in a high heat environment or due to the fan or vents being blocked during operation (e...