Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Memory: •256 MB on-board memory •128 MB Compact Flash (upgradeable to 1 GB factory programmed) Weight: •NXD-1200V: 10.80 lbs (4.90 kg) •NXT-1200V: 10.80 lbs (4.90 kg) LCD Parameters: •Aspect Ratio: 4:3 •Brightness (luminance): 250 cd/m2 •Channel transparency: 8-bit Alpha channel transparency •Contrast ratio: 300:1 •Display area (HW): 183.10 mm x 247.40 mm •Display colors: 256K (18-bit color depth) •Dot/Pixel pitch: 0.297 mm •Screen resolution (HV): 800 x 600 pixels •Video formats: NTSC, PAL, and SECAM (shown within variable-size video windows) Viewing Angles: •Vertical: + 80° (up from center) and - 80° (down from center) Supported Audio Sample Rates: •48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz, 11025Hz, and 8000Hz. Certifications: •FCC Part 15 Class B, CE, and EN 60950 Front Panel Components: •Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness •Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when panel is approached •Front Setup Access Button: Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state •Microphone: Used for intercom applications •Speakers: Stereo output with a frequency response of 450 Hz - 7 KHz 1200V Specifications (Cont.) Rear Panel Components: •Audio/Video Connector: RJ-45 connector for communication of differential audio/video signals •Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication •PWR Connector: 2-pin 3.5 mm mini-Phoenix connector •Stereo Output Connector: Stereo output through a 3.5mm mini-jack •USB Connector: Two Type A USB ports •Mini-USB Connector: 5-pin Mini-USB connector Operating /Storage Environments: •Operating Temperature: 10° C (50° F) to 40° C (104° F) •Operating Humidity: 20% to 85% RH •Storage Temperature: -20° C (-4° F) to 60° C (140° F) •Storage Humidity: 5% to 85% RH Included Accessories: •Installation Kit for 12" and 17" NXD panels (KA2251-01): - 2-pin mini-Phoenix connector (41-5025) - Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08) - One CAT5 Suppression Ferrites (04-0014) - Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192) •Installation Kit for 12" NXT panels (KA2251-03): - 2-pin mini-Phoenix connector (41-5025) - Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08) - Two CAT5 Suppression Ferrites (04-0014) •Modero Table Top Cable (CA2250-50) - provided with all NXT Table Top panels. •NXA-AVB/ETHERNET Breakout Box (FG2254-10) Other AMX Equipment: •CB-TP12 Conduit/Wallbox (FG031-10) •CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965) •Kensington Lock Bracket (FG2259-10) (optional only with NXTs) •MB-TP12 Universal VESA Mounting Box for NXD panels (FG031-50): - Black metallic VESA back box (62-0031-50) - Black plastic cover (with grommet opening) (60-0031-50) - Strain relief grommet (45-0004-03) - Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02) - Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black) (80-0139) •NXA-BASE/B (FG2255) •NXA-PCI80211G Wireless Card (FG2255-04) •NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50) •NXT-BP (FG2250-10) •NXT-CHG (FG2250-50) •PSN4.4 Power Supply (12 VDC) (FG423-45) •PSN6.5 Power Supply (12 VDC) (FG423-41) •Upgrade Compact Flash (factory programmed with firmware): NXA-CFTPV256M - 256 MB V/VG compact flash card (FG2116-43) NXA-CFTPV512M - 512 MB V/VG compact flash card (FG2116-44) NXA-CFTPV1G - 1 GB V/VG compact flash card (FG2116-45) Panel Connectors FIG. 2 shows the connectors located on the 1200V Modero Video panels. The Audio/Video RJ-45 connector provides differential audio/video signals between the touch panel and the NXA-AVB/ETHERNET. This connector routes Composite video, Stereo (left/right) audio, and microphone audio. FIG. 2 Connector layout on the 1200V Touch Panels NXA-AVB/ETHERNET Breakout Box FIG. 3 shows the front and rear connectors on the NXA-AVB/ETHERNET breakout box. This breakout box can be mounted on either a horizontal flat surface or in an equipment rack (by removing the front faceplate and securing it to an (optional) AC-RK Rack Kit). FIG. 3 Connector layouts on the NXA-AVB/ETHERNET Breakout Box Wiring the NXA-AVB/ETHERNET Connectors and Cables The inputs and outputs on the breakout box are separated into front and rear connectors. The rear connectors are used to input external signals. The front connectors are used to communicate signals between the NXA-AVB/ETHERNET and a target Modero panel. FIG. 4 provides a layout of the wiring connection both into and from the breakout box. Power should be applied to the NXA-AVB/ETHERNET only after all connections have been secured onto both the breakout box and the target panel. FIG. 4 NXA-AVB/ETHERNET Breakout Box connector wiring diagram Use a standard CAT5 Ethernet cable (connected to the rear of the Table Top Panel or to the side of the Wall Panel) to provide both communication and 10/100 network connectivity between the panel, breakout box, NetLinx Master, and the network....