Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. Set to “Front L” if your listening position is front left, or “Front R” if front right. 3 Touch “Language” to set the display language. Touch repeatedly until the desired language (English/Spanish/Russian) appears. 4 Touch “OK.” The setting is complete. This setting can then be further configured in the setting menu. • For details on setting the subwoofer connection status, see page 49. • For details on setting the listening position, see “Optimizing sound for the listening position — Intelligent Time Alignment” on page 41. • For details on setting the display language, see page 46. Radio Radio Reception controls Touch the display if the reception controls are not displayed. 1 Touch “Source List,” then “Tuner.” (For XAV-64BT only: From the top menu, touch “AV Source,” then “Tuner.”) The radio reception display appears, and the preset list is displayed automatically. 2 Touch “Band.” The band list appears. ATT Source List Band Receive Menu Preset List PTY List TA AF Top P1 P2 P3 BTM Memory P4 P5 P6 ATT Band FM1 Receive Menu Preset List FM2 FM3 LW PTY List TA AF Top MW Source List 3 Touch the desired band (“FM1,” “FM2,” “FM3,” “MW,” or “LW”). Touch “Band” again to close the band list. 4 Perform tuning. To tune automatically Touch ./>. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. To tune manually Touch m/M repeatedly until the desired frequency is received. To skip frequencies continuously, touch and hold m/M. 1234 5 ATT Band Receive Menu Preset List PTY List TA AF Top Source List 6 7 8 9 0 qa 1 “Source List” Touch to open the source list. (page 12) 2 “ATT” Touch to attenuate the sound. To cancel, touch again. 3 “TA” Touch to set TA in RDS. (page 18) 4 “AF” Touch to set AF in RDS. (page 18) 5 “Top” XAV-64BT Touch to open the top menu. (page 12) XAV-63 Touch to open the source list. (page 12) 6 m/M Touch to tune manually. Touch and hold to continuously skip frequencies. 7 ./> Touch to tune automatically. 8 “Band” Touch to open the band list and change the band. 9 “Receive Menu” Touch to open the receive menu, which contains the following items. • “Regional” (page 18) 0 “Preset List” Touch to list up stored stations, or store stations. (page 17) qa “PTY List” Touch to open the PTY list. (page 19) Reception indications ATT Band Receive Menu Preset List PTY List TA AF Top 15 Source List BA Reception indications ATT Band Receive Menu Preset List PTY List TA AF Top 15 Source List BA C D A Current source icon*1 B Band name, preset number*2, frequency*3/ status C Volume level*4 D EQ7 setting status *1 Appears only when the controls are displayed. *2 Appears only when a preset station is received. *3 While receiving an RDS station, the program service name appears. For details, see “RDS” on page 18. *4 When ATT is activated, appears. Storing and receiving stations Caution When tuning to stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Touch “Source List,” then “Tuner.” To change the band, touch “Band,” then select the desired band (“FM1,” “FM2,” “FM3,” “MW,” or “LW”). 2 Touch “Preset List,” then “BTM.” The unit stores the first six available stations in the preset list (“P1” to “P6”). A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you want to store, touch “Preset List.” 2 Touch “Memory,” then touch a number in the list (“P1” to “P6”). The number and the confirmation display appear. 3 Touch “Yes.” The station is stored. Note If you try to store another station to the same number, the previously stored station will be replaced. Tip When an RDS station is stored, the AF/TA setting is also stored (page 18). Receiving stored stations 1 Select the band, then touch “Preset List.” 2 Touch the desired number (“P1” to “P6”). RDS RDS FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items A ATT Band Receive Menu Preset List PTY List TA AF Top Source List BC A Band name, preset number, frequency (program service name), RDS data, TA*1 B RDS*2, TP*3 C Clock *1 During traffic information. *2 During RDS reception. *3 During traffic program reception. RDS services This unit automatically provides RDS services as follows: AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually. TA (Traffic Announcement)/TP (Traffic Program) Provides current traffic information/programs. Any information/program received will interrupt the currently selected source. PTY (Program Types) Displays the currently received program type. Also searches for a designated program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes • Depending on the country/region, not all RDS functions may...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - XAV-63 (3.06 mb)