Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The Vu Qube V10 is equipped with a FastFind remote enabling you to quickly position the Vu Qube antenna from inside your vehicle. The Vu Qube V10 is compatible with any service provider including DIRECTV®, DISH Network® or Bell ExpressVu® This manual includes: • Brief background on satellite television • Components overview • Installation diagrams and instructions • Operating Instructions The satellite broadcast market is continually changing and expanding. The information in this manual was accurate at the time of printing. If the Vu Qube does not operate as shown in this manual, please call Wallace Technologies at 1-866-802-2228 or email us at info@vuqube.com. Technical Support Phone: (866) 802-2228 Email: info@vuqube.com Web: A Quick Reference guide is included with the Operating Instructions & Elevation information. We suggest you keep this reference guide with the Vu Qube Controller or near your Satellite TV receiver. Vu Qube 2 V10-6/1007 Background Satellites used for television signals are 22,300 miles (37,000 km) above the earth’s equator. The purpose of the Vu Qube is to acquire the signal traveling that great distance and transmit the signal to the digital receiver in your vehicle, so you can watch TV anywhere you park. Satellite television, like other communications relayed by satellite, starts with a transmitting antenna located at an uplink facility on Earth. The uplink dish is pointed toward a specific satellite and the uplinked signals are transmitted. The signal transmitted to the satellite is within a specific frequency range and is received by one of the transponders tuned to that frequency range aboard that satellite. The transponder then transmits the signals back to Earth but at a different frequency band (to avoid interference with the uplink signal). The leg of the signal path from the satellite to the receiving Earth station, in this case the Vu Qube, is called the downlink. The downlinked satellite signal, quite weak after traveling a great distance is received by the Vu Qube antenna, which reflects the weak signal to a focal point that gets transferred to a feedhorn. The receiving antenna must have a clear view, without obstruction, of the southern sky to maximize the signal acquired. This signal is then amplified and converted by the LNBf (Low-noise block converter feed) to a signal that is sent via a co-axial cable to the receiver. Once the signal is transmitted from the Vu Qube to your receiver, you can enjoy satellite television programming in your vehicle just like at home! Vu Qube 3 V10-6/1007 Vu Qube V10 Component Overview Manual Quick Vu Qube FastFind Remote Cable (20') % Mounting Kit (Purchased Separately) Kit shown is Model Number 31100 ***You will need to supply your own fasteners to attach a Vu Qube bracket to your vehicle. Depending on the cab material, fasteners such as lag screws, well nuts, sheet metal screws, toggle bolts and T anchors may be used; fasteners should always be used in combination with compatible sealant to environmentally seal the holes after installation.*** Items needed to watch TV Tools needed for installation Satellite TV service Satellite TV receiver Television Drill and drill bits Tape measure Screwdrivers and wrenches Adhesive sealant (compatible with vehicle material) Fasteners to secure components and wiring SPECIFICATIONS Height: 17.5" Width: 16" Weight: 10.5 lbs Range: US/Southern Canada Compatibility: DIRECTV, Dish Network, Bell ExpressVu, Free-to-air receivers Operating Temp: May experience difficulty positioning antenna when temperatures are below 0°F eference Guide Vu Qube Antenna RG6 Coaxial Vu Qube 4 V10-6/1007 FCC User Information Main Components Vu Qube V10 Antenna Vu Qube V10 Remote FCC ID: UUM10156V10 / , IC: 6873A -10156V10 fl| Part #: VQV10R I FCC ID: UUM10157V10 1 no IC: 6873A -10157V10 J VOOum This device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions: 1) This device must not cause harmful interference, and 2) This device must accept interference received including interference that may cause undesired operation. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device must not cause harmful interference, and 2) This device must accept interference received including interference that may cause undesired operation. Please note that changes or modifications to the Vu Qube V10 or Vu Qube V10 remote not expressly approved by Wallace Technologies could void the purchaser’s or user’s authority to operate this equipment. This device must not be co-located with other transmitters to ensure compliance with FCC RF exposure requirements. The Vu Qube V10 and Vu Qube V10 remote have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm...