Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
This remote control can be used to: • Navigate system menus and access media databases on a television or monitor • Navigate system menus and access media databases in its own display window • Control system devices This remote control goes beyond a typical “universal” remote that simply learns IR codes from TVs, VCRs, CD players, and DVD players. This device features: • Bi-directional communication with system components • ZigBee wireless mesh networking • Full access to system components • Back-lighting on keys and display for ease of use in dark rooms • Quick-access buttons to select recently used audio and video devices • Programmable buttons • Paging functionality • Standard control features for: Digital Satellite Systems (DSS), Cable Boxes, TV Tuners, Digital Video Recorders (DVR), DVD Changers/ Players, CD Changers/Players, MP3 Players, VCRs, or TVs. • Powered by four AA batteries (included) Install and Maintain Batteries Install Batteries Install the four AA batteries (included with the product) into the back of the device. Ensure that you insert them into the remote control according to the diagram provided in the battery compartment (with the + and - terminals aligned correctly). Battery Use and Care Tips • Keep battery contacts and compartment clean. • Remove batteries from the remote control if it is not expected to be in use for several months. • Extreme temperatures reduce battery performance. Avoid putting the remote control in very warm places. + AA + AA + AA + AA Battery Replacement Safety Rules CAUTION! To prevent battery shorting, leakage or rupture: • Use AA Alkaline batteries only in the remote control. • Do not mix battery types, such as Alkaline and rechargeable NiMH batteries. • Do not attempt to recharge a battery unless the battery is specifically marked “rechargeable.” • Never dispose of batteries in a fire. Attention ! Pour empecher court-circuiter, fuite ou rupture de batterie : • Utilisez les accumulateurs alcalins d'AA seulement dans le commutateur. • Ne melangez pas les types de batterie, tels que les batteries alkalines et rechargeables de NiMH. • N'essayez pas de recharger une batterie a moins que la batterie soit specifiquement marque « rechargeable ». • Ne vous debarassez jamais des batteries dans un feu. Vorsicht! Das Batteriekurzschlu., -durchsickern oder -abbruch verhindern: • Benutzen Sie AA alkalische Batterien nur im Schalter. • Mischen Sie nicht Batteriearten, wie alkalische und nachladbare NiMH Batterien. • Versuchen Sie nicht, eine Batterie neuzuladen, es sei denn die Batterie ist spezifisch gekennzeichnetes „nachladbares.“ • Entledigen Sie nie sich Batterien in einem Feuer. Configure the Remote Control 1 Start Composer and connect to the controller. 2 In the System Design view (selected by default), select the room where the Remote Control will reside. 3 Under the My Drivers tab, locate the System Remote SR-250 (RC200) under the User Interface section. Note: RC200 is the same as the System Remote Control SR-250. The SR250 is the product that needs to be selected in the composer software. 4 Double-click SR-250 (RC200) to add the device to the project tree. 5 Identify the SR-250 (RC200): a. In the Connections view, go to the Network tab. b. Select SR-250 (RC200) in the center pane. c. Click Identify (or right-click and choose Identify). d. When prompted to do so, press the Blue Zone Button four times to have the device identify itself to the Escient system. Note: To complete theidentification process, theremote must be on the same ZigBee channel asthe controller and the controller must have Zserver enabled. If you need to change the ZigBee channel on the remote, see step 7. e. Once the MAC address appears in the window, click Close. 6 View or change Remote Control properties as needed in Composer: In the System Design view in the project tree (left pane), select the SR250 (RC200) object to display the remote’s properties. The properties include: • Screen Backlight — Set the light level (brightness) of the screen backlight. Choose a percentage from 0 (Off) to 100 (full brightness). • Keypad Backlight — Set the light level (brightness) of the keypad backlight. Choose a percentage from 0 (Off) to 100 (full brightness). • Sleep Mode—Set how long the remote stays awake after no activity. The default setting is 15 seconds, but can be extended up to 60 seconds or can be reduced down to 0 to conserve battery life. • Battery Level — Displays current strength of batteries. • Channel — Displays the ZigBee channel (1-14) set for the RC200, which should match the ZigBee channel set for the controller. • Gateway — Displays the MAC address of the zigbee server (usually your controller unless you specify differently). • MAC — Displays the remote’s own MAC address. • Firmware Version — Displays the current firmware version. 7 Check or change ZigBee Channel: If you need to change the ZigBee channel in order to match the controller’s channel (which is sometimes changed to improve re...