Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Instructions are given below for programming your opener to match the remote control's code. The additional remote control buttons can also activate other Security. garage door openers and/or light controls. (InstrucUons for programming light products are Included with those accessories.) SECURITY,4t, Garage Door Openers Program the Opener to Accept the Remote Control Code Select a remote control push button to operate the receiver° The large button is recommended for use with the garage door opener. ff you have a Premium Control Console: 1: W?th the door closed, press and hold the selected remote push button. See Figure 1. 2. Press and hold the Light button on the door control, .Figure 2 3. Press and hold the door control push button. 4. After the opener light flashes, release all buttons. ff you do not have a Premium Control Console: 1. Press and hold the selected remote push button. See Figure 1o 2. Press and release the.SRT (learn) button on the opener panel. See Figure 3oThe indicator light on the panel wili begin to blink and the opener light wili flash once, 3 Release the remote p_sh butt6n. Now the opener will operate when that remote control button is pressed,r Test it by pressing the remote button to see that the door goes up and down,, To Erase All Remote Control Codes Press and hold the SRT button on the opener panel until the indicator light turns off (about 6 seconds). All remote codes are now erased, Then follow the steps above to re program each remote control. Model 139.53680 S]ECUBII"t',I,; Compact 3-Fun_ttnn _€,mnt_, t'_-nnfroI Children operating or playing with a garage door opener can Injure themselves or others. The garage door could close and cause serious Injury or death. Do not allow childr.en to operate the door push button(s) or remote control(s). A moving garage door could injure or kill someone under It. Activate the opener only when you can see the door clearly, It is free of obstructions, and Is properly adjusted. u,n,, i, u Figure 1 Figure 2 DoorControl Select a remote cont.,-o_push button Pushbutton (_) Compact 3-Function lf_ 3-Function Remote Control _ Remote Control Ught Premium Control Console Figure 3 SECURITY+ Garage Door Opener Orange _ _ " _ F'Aq SRT (learn) | _ _ L_J Button "---._ Yellow { [lj-'7)'__ Indicat°r__i____-../Ugl_ t Code programming instructions are also located on the opener panel. To Control the Opener Ligtlt (Premium Consoles) With SECURITY+ remote controEs, a push button can be programmed to operate the opener light without opening the door. 1_ With the door closed, press and hold the remote button that you want to control the light 2. Press and hold the Light button on the door control. 3 Press and hold the Lock button on the door control. 4. After the opener light flashes, release aHbuttons, Test by pressing the remote push button, The opener light should turn on or off but the door shouid not move. The Remote Control Batteries The lithium batteries should 3-FUNCTION Openthisend produce po...
Dieses Handbuch ist für folgende Modelle:Safety Gate - 139.5368 (174.29 kb)