Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Regalo, modell FLEXI GATE FORM 1180

Hersteller: Regalo
Dateigröße: 565.62 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

These Wall Mounting Hinges must be used in securing your gate to the wall . If not, the gate can become dislodged from the opening and unstable. (1) Check to make sure you have the following components before you begin to set up your gate. (1). Folded Gate Frame, and Wall Mounting Assembly (2). Mounting Screws x 8 pcs. (1) 1 pc to (2) 8 pcs (2) Step 1. Preparing to Install your Gate Begin by unfolding the gate frame. To do this simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram 1. Loosen the knobs enough to allow the gate to swing open freely. Diagram 1 (3) Step2: Move the gate to the side of the wall opening then bring the Wall Mounting Hinge to the wall as shown in Diagram 2. Diagram 2 (4) Step 3: Apply a screw driver to fix the Wall Mounting Hinge on to the wall as shown in Diagram 3. Diagram 3 Step 4: Repeat the Step 2 and 3, on the other end of the gate. Go back an tighten all Locking Knobs. When this is done, the gate is ready to use on the gate opening. (5)...