|
Anleitung Zusammenfassung
You agree to properly install this product and that if you fail to do so GTO, Inc. shall in no event be liable for direct, indirect, incidental, special or consequential damages or loss of profits whether based in contract tort or any other legal theory during the course of the warranty or at any time thereafter. The installer and/or user agree to assume responsibility for all liability and use of this product releasing GTO, Inc. from any and all liability. If you are not in agreement with this disclaimer or do not feel capable of properly following all installation and safety instructions you may return this product for full replacement value. READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to install and use this automatic gate opener. This gate opener produces a high level of force. Stay clear of the unit while it is operating and exercise caution at all times. All automatic gate openers are intended for use on vehicular gates only. This product meets and exceeds the requirements of UL 325, the standard which regulates gate opener safety, as established and made effective March 1, 2000, by Underwriters Laboratories Inc. DO NOT INSTALL THIS OPERATOR WITHOUT SAFETY EDGES AND ROLLER GUARDS! 3121 Hartsfield Road • Tallahassee, Florida, USA 32303 Telephone GTO Sales: 1-800-543-GATE (4283) or (850) 575-0176 • Fax (850) 575-8912 or GTO Technical Service: 1-800-543-1236 or (850) 575-4144 • Fax (850)575-8950 RB270 rev - 4/5/06 TABLE OF CONTENTS Gate Operator Class Categories --------------------------------------------------------inside cover Important Safety Instructions -----------------------------------------------------------page 1 Important Safety Instructions for the System Designer ----------------------------page 2 Important Safety Instructions for the Installer ---------------------------------------page 2 Secondary means of Protection Against Entrapment -------------------------------page 4 Important Safety Instructions for the Consumer/End User ------------------------page 5 Warning Labels and Signs --------------------------------------------------------------page 7 Technical Specifications for SL-1000 ----------------------------------------------------page 9 Technical Specifications for SL-2000 ----------------------------------------------------page 10 Parts Identification (Single Gate Operator) -------------------------------------------page 11 Single Gate Operator Installation -------------------------------------------------------page 12 Overview and Gate Preparation -------------------------------------------------------page 12 Suggested Conduit & Wiring and Mounting the Legs ------------------------------page 13 Determining the Mounting Position and Mounting the Operator -----------------page 14 Installing the Chain ----------------------------------------------------------------------page 15 Disconnecting Operator Chain for Manual Operation of Gate --------------------page 15 Powering the System -----------------------------------------------------------------------page 16 Maximum Operational Cycles Chart --------------------------------------------------page 16 Installation of the Transformer ---------------------------------------------------------page 16 Control Board settings ---------------------------------------------------------------------page 20 DIP Switches ----------------------------------------------------------------------------------page 20 Potentiometers --------------------------------------------------------------------------------page 21 Connecting the Receiver to the Control Board ---------------------------------------page 22 Setting Your Personal Transmitter Code --------------------------------------------------page 22 Mounting the Receiver ----------------------------------------------------------------------page 23 Adjusting the Limit Switches ------------------------------------------------------------page 24 Connecting Safety Devices ----------------------------------------------------------------page 25 Connecting Accessories ---------------------------------------------------------------------page 26 Maintenance ---------------------------------------------------------------------------------page 28 Troubleshooting Guide ---------------------------------------------------------------------page 29 Warranty and Repair Information ------------------------------------------------------page 31 Dual Gate System Installation -----------------------------------------------------------page 32 Preparing the Gates ----------------------------------------------------------------------page 34 Wiring the Second Operator -----------------------------------------------------------page 35 Setting the Control Board for Dual Gate Installations -----------------------------page 36 Accessory Catalog -------------------------------------------------------------------------page 38 Installation Check List -------------------------------------------------...
Dieses Handbuch ist für folgende Modelle:Safety Gate - SL-2000B (4.64 mb)