Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
TOYOTA / LEXUS / SCION Owner’s Manual Media Gateway ISTY11 PGHTY1 add Satellite Radio iSimple® A Division of AAMP of America™ 13190 56th Court Clearwater, FL 33760 Ph. 866-788-4237 support@isimplesolutions.com ©2009 AAMP of Florida, Inc. 09-10-09 Table of Contents Pages 1. Introduction 2 2. Precautions 2 3. Compatibility Notes 3 4. Dipswitch Settings 3 5. Installation 4 6. Selecting Sirius Input 5 7. Selecting AUX Input 5 8. Troubleshooting 6 9. Warranty Info 7 1 Harness Connection . Port 1 . Port 2 . Dip Switches (See Manual) . USB . Harness Connection . Port 1 . Port 2 . Dip Switches (See Manual) . USB . Harness Connection . Port 1 . Port 2 . Dip Switches (See Manual) . USB . Media Gateway & Optional Add-ons Media Gateway Harness Part #: PGHTY1 Factory Radio Not Included Media Gateway Part #: PXAMG PXAMGSR Cable *The Media Gateway will only support 2 inputs. OR MP3 Player (not included) DVD Player (not included) 1. Introduction Thank you for purchasing the iSimple® Media Gateway. The Media Gateway is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your iPod performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the Media Gateway. The Media Gateway allows connectivity for Sirius Satellite Radio (SCC1 sold seperately) enabling full control of this device from the factory installed radio. It also retains original system features such as satellite radio and rear seat entertainment (if equipped). 2. Precautions PREVENTING DAMAGE TO YOUR VEHICLE To eliminate the risk of an electrical short, we recommend disconnecting the vehicle’s battery prior to installation. If you do not feel comfortable making these connections, we suggest you seek professional installation. We recommend that the iPod be disconnected from the interface when the vehicle is not in use. PROPER MOUNTING LOCATION Securely install the interface in a location free from; heat, humidity, moving parts, sharp metal edges or direct sunlight. We recommend securing the interface to a suitable location using; double sided tape, VelcroTM or zip-ties. 3. Compatibility Notes Radio MUST have a button labeled “AM/SAT”. This indicates that the radio is satellite ready. Please visit for the most up to date application information and to verify your vehicle’s compatibility. 4. Dipswitch Settings All 4 dipswitches MUST be set in the OFF (up) position for proper operation except for the 2010 Toyota Camry. The 2010 Toyota Camry requires dipswitch one to be in the ON (down) position. 2010 TOYOTA CAMRY ALL OTHER VEHICLES 5. Installation 1. When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation. 2. Carefully remove the trim panels covering the 10mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness. 3. Disconnect the factory 12-Pin harness (if present) from the back of the radio. Disconnect the antenna from the radio. 4. When connecting the Satellite Radio tuner (SCC1 sold separartely), make the folllowing connections before connecting the PXAMG to the vehicle. Plug the black end of the 3 foot PXAMGSR (8-Pin mini-din to 8-Pin mini-din; sold seperately) into the second port (closest to the dipswitches) on the Media Gateway. Connect the gray end of this cable into the Satellite Radio tuner. 7. Plug in the male connectors on the PGHTY1 harness into the 12-pin port on the back of the radio. Next, connect the factory 12-pin harness (if present) into the female connector on the PGHTY1 harness. Be sure to make a firm connection but do not force it. Plug the Black micro-fit 24-pin connector on the PGHTY1 harness into the PXAMG Media Gateway box. 8. To complete the installation secure the Media Gateway (PXAMG) and Satellite Radio tuner (SCC1) into the cavity in the dash behind the radio. Be sure that the cables and interface modules are not near moving parts or sharp metal edges as they may damage the cables. To prevent rattling noises inside the dash, use zip ties, tape, or other fasteners to mount the interfaces securely. 9. With all connections made, reconnect the vehicle’s battery, insert the key into the ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and Satellite Radio tuner before reinstalling the factory dash panels. 10. Note: The first time you access the Gateway, your radio may display “DEV INIT” while the device is initializing. If this is displayed, please wait one minute then cycle the ignition off and on. Then access SAT mode again to begin normal gateway operation. 6. Sirius Satellite Radio Operation Entering Mode Select Menu Press the “AM/SAT” button to switch to AM then again to s...