Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Setting AF and TA 1Press (AF/TA) repeatedly until the desired setting appears. Select To AF-ON activate AF and deactivate TA. TA-ON activate TA and deactivate AF. AF, TA-ON activate both AF and TA. AF, TA-OFF deactivate both AF and TA. Storing RDS stations with the AF and TA setting Presetting the volume of traffic announcements Receiving emergency announcements Staying with one regional program — REG If you leave this regional program’s reception area, set “REG-OFF” in setup during FM reception (page 10). Note This function does not work in the UK and in some other areas. Local Link function (UK only) Selecting PTY 1Press (PTY) during FM reception. The current program type name appears if the station is transmitting PTY data. 2Press (PTY) repeatedly until the desired program type appears. 3Press (SEEK) –/+. The unit starts to search for a station broadcasting the selected program type. Type of programs NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Popular Music), ROCK M (Rock Music), EASY M (Easy Listening), LIGHT M (Light Classical), CLASSICS (Classical), OTHER M (Other Music Type), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s Programs), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary) Note You cannot use this function in countries/regions where no PTY data is available. Setting CT 1Set “CT-ON” in setup (page 10). Notes •The CT function may not work even though an RDS station is being received. •There might be a difference between the time set by the CT function and the actual time. Adjusting the balance and fader — BAL/FAD 1Press the select button repeatedly until “BAL” or “FAD” appears. The item changes as follows: LOW*1 t HI*1 t BAL (left-right) t FAD (front-rear) t AUX*2 2Rotate the volume control dial to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Customizing the equalizer curve — EQ lite 1Select a source, then press (EQ) repeatedly to select “CUSTOM.” 2Press the select button repeatedly until “LOW” or “HI” appears. 3Rotate the volume control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB. Repeat steps 2 and 3 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Tip Other equalizer types are also adjustable. 1Press and hold the select button. The setup display appears. 2Press the select button repeatedly until the desired item appears. 3Rot...