Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
So you do not have to select “VOL” to adjust the volume level. *- TRE -- FAD —, (treble) (fader) LOUD <- BAL •*— (loudness) (balance) Indication To do: Range BAS Adjust the bass. -06 (min.) 1 +06 (max.) TRE Adjust the treble. -06 (min.) 1 +06 (max.) FAD* Adjust the front and rear speaker balance. R06 (Rear only) 1 F06 (Front only) BAL Adjust the left and right speaker balance. L06 (Left only) 1 R06 (Right only) LOUD** Boost low and high frequencies to produce a well-balanced sound at low volume level. LOUD ON 1 LOUD OFF VOL Adjust the volume. 00 (min.) 1 50 (max.) * If you are using a two-speaker system, set the fader level to “00. ” ** For KS-FX725R: Loudness can be selected by pressing SEL button repeatedly. For KS-F525: See “Turning on/off the loudness tunction ” on page 20!. 19 ENGLISH ENGLISH «5 Turning on/off the loudness function_ (only for KS-F525) The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press LOUD, the loudness function turns on and off alternately. Using the sound control memory You can select and store a preset sound adjustment suitable for each playback source (Advanced SCM). Selecting and storing the sound modes Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, tape and external components. I nil 71 L LIUII tlkl LIU • If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM - SCM LINK” on page 25. Select the sound mode you want. I nil 71 n rjr L IJUII Ur t Note: For KS-FX725R, you can turn on/off the loudness function using the SEL button and the control dial (see page19). MB T Ex.: When you select “BEAT” Each time you press the button, the sound mode changes as follows: p-SCM OFF BEAT-»SOFT-»POP 20 Indication For: Preset values BAS TRE LOUD SCM OFF (Flat sound) 00 00 ON BEAT Rock or disco music +02 00 ON SOFT Quiet background music +01 -03 OFF POP Light music +04 +01 OFF © When “SCM LINK” is set to “LINK ON,” the selected sound mode can be stored in memory for the current source and the effect applies only to the current source. When “SCM LINK” is set to “LINK OFF,” the selected sound mode effect applies to any source. Recalling the sound modes When “SCM LINK” is set to select the source. LINK ON, KS-FX725R KS-F525 Each time you change the playback source, the SCM indicator flashes on the display. The sound mode stored in memory for the selected source is recalled. Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments ” on page 22. • To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see pages 19 and 20. (Your adjustments will be canceled if another source is selected.) TAPE 21 ENGLISH ENGLISH ^_ Storing your own sound adjustments_ You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Call up the sound mode you want to adjust. • See pages 20 and 21 for details. 2 For KS-FX725R: 1 Select “BAS (bass),” “TRE (treble),” or “LOUD (loudness)”. 2 Adjust the bass or treble level or turn the loudness function ON/OFF. 3 Repeat step 2 to adjust the other items. 4 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display. Your adjustment made for the selected sound mode is stored in memory. 5 Repeat the same procedure to store other sound modes. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 21. For KS-F525: To adjust the bass or treble level. 1 Select “BAS” or “TRE”. 2 Adjust the bass or treble level. 1 2 To turn on the loudness function. Each time you press LOUD, loudness function turns on and off alternately. 22 OTHER MAIN FUNCTIONS mm Setting the clock You can also set the clock system to either 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 24.) 2 Set the hour. 1 Select “CLOCK H (hour)” if not shown on the display. 2 Adjust the hour. 1 2 3 Set the minute. 1 Select “CLOCK M (minute).” 2 Adjust the minute. 1 1 Select “24H/12H." 2 Select “24H" or “12H." 5 Press SEL (select) to finish the setting. To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - KS-F525 (3.28 mb)