Stimmen - 10, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Hyundai H-CDM8044 |
Anleitung Zusammenfassung
Press it again to turn the sound on. Mode setting Press the MODE button repeatedly to select: TUNER => CD => SD/MMC (if the SD/ MMC card is inserted) => USB (if the USB device is inserted) => AUX. If you select TUNER mode, press BAND button once or more to select: FM1, FM2, FM3, MW1, MW 2. 16 Display operations 1. Press the DIS/ REC button to show the following current tuning information and time in any play mode: CT (Clock/ Time) => PTY => Radio frequency =>PS. 2. Press and hold for 2 seconds to enter the RECORD mode. Setting the time 1. Enter the ADJ mode (by pressing the SEL button). 2. Rotate the VOL knob clockwise to set hour, rotate counter-clockwise to set minutes. Subwoofer function Long press the Band button to turn on SUBWOOFER, and long press Band again to turn off this function. 17 Digital tuner_ Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press PWR to power on, then press the MODE button to select TUNER. Press BAND once or more to select: FM1, FM2, FM3, MW1, MW2. Manual/ automatic tuning • Manual tuning: press T-UP or T-DN button and hold for 2 seconds to enter manual tuning. Press the T-UP/ T-DN buttons on the panel repeatedly to select a station upward or downward step by step. • Automatic tuning: Press the T-UP/ T-DN buttons, the automatic search will start. It will play when finds the station. Programming tuner stations You can store up to a total of 30 radio stations in the memory (18 FM, 12 MW), manually or automatically. • To store a station: - Select a band (if needed) - Select a station by T-UP/ T-DN buttons - Hold a Preset button (1-6) which you want store the station for at least 2 seconds. • To recall a station: - Select a band (if needed) - Press a Preset button (1-6) briefly to recall the stored station 18 AS/ PS function (Auto Store/ Preset Scan) • Preset scan: press AS/ PS button to scan all preset stations in the memories of the current band and stay on each memory stations for about 5 seconds. The memory location indicator on the LCD will flash during the process. To stop preset scan, press AS/ PS button again. • Auto memory store: press AS/ PS button for more than 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press AS/ PS button again. AF function (Alternative Frequencies) • AF mode: Press AF/REG button shortly to turn on or turn off the AF function. If the AF function is on the display will show “AF”. When AF switching mode is selected, but RDS information is not received yet the “AF” will be flashing. The RDS program will be automatically searched and received. After turning on, if the RDS signal is week or even no signal, the unit will search another frequency with this RDS program. Default setting is ON. • Region mode: Press and hold AF/REG button for 2 seconds, the unit will be under REGION ON or REGION OFF mode: - REGION ON: PI code will be searched during AF searching. The display will show “REGION ON”. - REGION OFF: PI code and covered area will not be searched. Default setting is OFF. 19 PTY (Program Type) function 1. Press PTY button to activate the PTY function. 2. Press T-UP/ T-DN buttons to search the last time selected PTY program. 3. Press PTY button long time to select PTY program type (turn the knob to select PTY type). 4. When the program is selected press the PTY button to start searching. If PTY code is different or not available, the "NOT FIND" PTY icon will start blinking on the LCD display. 5. Press PTY button to switch the PTY function off. TA (Travel Announcement)/TP (Travel Program Identification) Enable or disable TA mode: (Default is OFF) 1. Press TA button once to activate the function, Press again to turn off the function. 2. When TA function is activated, it will search the station with TA information automatically. If there is no TA information, it will search the station with TP information automatically, if there is no TP information either, it will return to the previous station after searching. 3. When receiving the station with TP information but without TA information, TP icon is on and TA icon keeps blinking; when receiving the station with TP and TA information, both TP and TA icons are on. 4. When playing in other mode and TA information is received, it will change to the radio mode automatically. After playing over, it will return to the previous mode. Buttons AS/PS / Preset [1-6] / PTY / MODE / T-UP»I / T-DN 1« and Band/ENT are locked. Press TA button once to ignore the received TA information, press TA button twice to turn off the function. 20 CD/ SD/ MMC/ USB operations Loading a disc 1. Turn the power on. 2. Press the OPEN button on the panel. 3. Insert the disc with the printed side facing upward into the slot. 4. Press...