Stimmen - 15, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. SonicStage and its logo are trademarks of Sony Corporation. ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. 2 Table of Contents Getting Started Resetting the unit........................4 Setting the clock........................4 DEMO mode...........................4 Detaching the front panel .................4 Attaching the front panel...............4 Inserting the disc in the unit...............5 Ejecting the disc......................5 Location of controls and basic operations Main unit ...........................6 Card remote commander RM-X151 ......6 CD_ Display items........................8 Repeat and shuffle play ................8 Radio Storing and receiving stations..............8 Storing automatically — BTM ..........8 Storing manually .....................8 Receiving the stored stations............8 Tuning automatically..................8 Other functions Changing the sound settings...............9 Adjusting the sound characteristics — BAL/FAD/SUB ...................9 Adjusting the equalizer curve — EQ3 . . . . 9 Adjusting setup items — SET.............9 Using optional equipment................ 10 Rotary commander RM-X4S ..........10 Additional Information Precautions........................... 11 Notes on discs...................... 11 About MP3 files .................... 11 About ATRAC CD .................. 12 Maintenance.......................... 12 Removing the unit...................... 13 Specifications ......................... 13 Troubleshooting....................... 14 Error displays/Messages .............. 15 3 Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ballpoint pen. RESET button □ Note Pressing the RESET button will erase the clock setting and some stored contents. Setting the clock The clock uses a 24-hour digital indication. 1 Press and hold (sel). The setup display appears. 2 Press CSED repeatedly until “CLOCK-ADJ” appears. 3 Press (dspl). The hour indication flashes. 4 Press the volume +/- button to set the hour and minute. To move the digital indication, press ( DSPL). 5 Press (sel). The clock starts and the next setup display appears. 6 Press and hold (sel). The setup is complete. To display the clock, press ( DSPL). Press (DSPL) again to return to the previous display. With the card remote commander In step 4, to set the hour and minute, press M or m. DEMO mode When the unit is turned off, the clock is displayed first, then demonstration (DEMO) mode starts the demonstration display. To cancel the DEMO mode, set “DEMO-OFF” in setup (page 9) while the unit is turned off. Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press (off). The unit is turned off. 2 Press îîî, then pull it off towards you. Notes • Do not drop or put excessive pressure on the front panel and display window. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Tip When carrying the front panel, use the supplied front panel case. Attaching the front panel Engage part ® of the front panel with part ® of the unit, as illustrated, and push the left side into position until it clicks. 4 Note Do not put anything on the inner surface of the front panel. Inserting the disc in the unit 1 Open the shutter. Playback starts. 3 Close the shutter. Ejecting the disc 1 Open the shutter. x 2 Push down the shutter until it clicks. x Notes • While ejecting or inserting the disc, do not close the shutter. The disc may be caught and damaged. • The disc may be ejected if you open the shutter forcefully. Tip The disc can be played with the shutter opened or closed. 5 Location of controls and basic operations Main unit Card remote commander RM-X151 m 0 m- off atT" ""soUrCE SEL (mode) o o CO 3 CO 6 2 m hwn Ah -ws 6 Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. a Volume +/- button To adjust volume. b ATT (attenuate) button To attenuate the sound. To cancel, press again. Q DSPL (display)/DIM (dimmer) button 4, 8 To change display items (press); change the display brightness (press and hold). □ OPEN shutter, disc slot (located behind the shutter) 5 e Display window f E...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - CDX-R33EE (810.11 kb)