Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Sony CDX-M700R |
Anleitung Zusammenfassung
The name of the currently selected item flashes. Changing the display item When you press (list) once, the list selected last time appears. Each time you press (list), the List changes as follows: ENS (Ensemble list) V SRV (Service list) V CMP (Component list) V PRS (Preset list) V DAB (Cancel) Listening to a DAB programme FoUow the procedure below to tune in a DAB programme manually. You can also store DAB services in the unit's memory for instant tuning (see "Presetting DAB services automatically (BTM)" on page 25). 1 While listening to a DAB programme, press (list) repeatedly until the Ensemble List appears. 2 Press M or m until the desired ensemble appears, then press (enter). 3 Press (list) repeatedly to until the Service List appears. 4 Press M or m repeatedly until the desired service appears, then press (enter). 5 Press (list) repeatedly until the Component List appears. 6 Press M or m until the desired component appears, then press (enter). Automatic updating of the ensemble list When you perform the BTM function for the first time, all the ensembles available in your area are automatically stored. When you perform the BTM function again, the contents of these lists are updated in accordance with the conditions described on page 25. An ensemble is added to the respective list when it is received during Automatic Tuning or Manual Tuning but is unlisted. An unlisted ensemble is also deleted from the respective list when: • you select an ensemble from the list, but it cannot be received. • you perform Automatic Tuning or Manual Tuning to receive a listed ensemble, service, or the component, but it cannot be received. 26 Settings on the audio reception DAB can contain multi-channel audio. You can select main or sub-channel for reception. Also, if you turn on the DRC (Dynamic Range Control) function, the dynamic range on the service which supports DRC can automatically be extended. The following items can be set: • Main/Sub — to selects chennel between "Main"(main-cannel) and "Sub"(sub-cannel). • DRC — to turn on or off the function. 1 While listening to a DAB programme, press (MENU). 2 Press M or m repeatedly until "DRC" or "Main (or Sub)" appears. 3 Press < or , to select the desired setting (Example: "on" or "off" ). 4 Press (ENTER). Note "Main (or Sub)" appears in the menu only when the unit is receiving a multi-channel programme. Locating a DAB service by programme type (PTY) You can use the PTY (Programme type selection) function to tune in the programme you want. 1 While listening to a DAB programme, press (DSPL/PTY). 2 Press M or m repeatedly to select the programme type. PV-r r A T Pop M ■\ J it j The programme types appear in the order shown on the page 22. 3 Press (ENTER). 27 DSP (CDX-M700R only) Setting the equalizer You can select an equalizer curve for five music types (Rock, Vocal, Groove, Techno, and Custom). You can store and adjust the equalizer settings for frequency and level. Selecting the equalizer curve 1 Press (source) to select a source (tuner, CD, or MD). 2 Press (sound) repeatedly until "EQ" appears. Rock >5 Vi -\ i j Adjusting the equalizer curve 1 Press (MENU). 2 Press M or m repeatedly until "EQ Tune" appears. 3 Press (ENTER). 4 Press < or , to select the desired equalizer curve. Rock Vocal Groove Techno -y-Custom -y- off 5 Press (ENTER). I t r “\ -iL Hz j 6 Press < or , to select the desired frequency. 62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16.0 kHz 3 Press < or , to select the desired equalizer curve. Rock Vocal Groove Techno Custom off To cancel the equalizing effect, select "off." After three seconds, the display returns to the normal playback mode. 7 Press M or m to select the desired level. The volume is adjustable by 1 dB steps from -12 dB to +12 dB. To restore the factory-set equalizer curve, press (enter) for two seconds. 8 Press (menu) twice. When the effect setting is complete, the normal playback mode appears. 28 Selecting the listening position Selecting a soundstage menu You can set a delayed time for the sound to reach the listeners from the speakers. In this way, the unit can simulate a natural sound field so that you feel as if you are in the centre of the sound field no matter where you sit in the car. Display window Centre of sound field POS All Normal setting (© + ® + ®) POS Front Front part (1 + 2) POS Front-R Right front (©) POS Front-L Left front (©) POS Rear Rear part (©) POS off Cancel 1 Press (source) to select a source (tuner, CD, or MD). 2 Press (sound) momentarily until "POS" appears. POST A11 ^ ^1L nA 1 J 3 Press < or , to select the desired listening position. All ^ Front ^ Front-R ^ Front-L ^ Rear ^ off The listening positions appear in the order shown above. To cancel the POS mode, select "off." After three seconds, the display returns to the normal playback mode. — Dynamic Soundstage Organizer (DSO) If your speakers a...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - CDX-M600R (3.7 mb)