Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Fotos und technische Daten Sony CDX-L550 |
Anleitung Zusammenfassung
The rotary commander works by pressing buttons and/or rotating controls. By pressing buttons to adjust the volume. 1 Press To Change source (radio/CD) (SOURCE) (MODE) Change operation (radio band) (ATT) Attenuate sound COFF)* Stop playback or radio reception (SOUND) Adjust the sound menu ( DSPL) Change the display item * If your car has no ACC (accessory) position on the ignition key switch, be sure to press ( off) for 2 seconds to turn off the clock indication after turning off the ignition. 16 By rotating the control Rotate and release to: - Skip tracks. - Tune in stations automatically. Rotate, hold, and release to: - Fast-forward/reverse a track. - Find a station manually. By pushing in and rotating the control Push in and rotate the control to: - Receive preset stations. Changing the operative direction The operative direction of controls is factory-set as shown below. To increase To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (sound) for 2 seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (page 18). 17 Adjusting the sound characteristics Changing the sound and display settings You can adjust the bass, treble, balance, and fader. The bass and treble levels can be stored independently for each source. 1 Select the item you want to adjust by pressing (sound) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (seek). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within 3 seconds after selecting the item. Quickly attenuating the sound (With the rotary commander) Press (att) on the rotary commander or card remote commander. After “ATT-ON” momentarily appears, the “ATT” appears in the display. To restore the previous volume level, press (ATT) again. Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). — Menu The following items can be set: SET (Set Up) • CLOCK (page 8) • CT (Clock Time) (page 16) • BEEP — to turn the beeps on or off. • RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander. - Select “NORM” to use the rotary commander as the factory-set position. - Select “REV” when you mount the rotary commander on the right side of the steering column. DSPL (Display) • D.INFO (Dual Information) — to display the clock and the play mode at the same time (on). • AMBER/GREEN — to change the illumination colour to amber or green (CDX-L550 only). • DIM (Dimmer) — to change the brightness of the display (CDX-50V only). - Select “ON” to dim the display. - Select “OFF” to deactivate the Dimmer. • M.DSPL (Motion Display) — to select the Motion Display mode from “1,” “2,” and “OFF.” - Select “1” to show decoration lines in the display and activate Demo display. - Select “2” to show decoration lines in the display and deactivate Demo display. - Select “OFF” to deactivate the Motion Display. • A.SCRL (Auto Scroll) - Select “ON” to scroll all automatically displayed names exceeding 8 characters. - When Auto scroll is set to off and the disc/ track name is changed, the disc/track name does not scroll. SND (Sound) • LOUD (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced. 18 P/M (Play Mode) • LOCAL-ON/OFF (Local seek mode) (page 11) - Select “ON” to only tune into stations with stronger signals. • MONO-ON/OFF (Monaural mode) (page 11) - Select “ON” to hear FM stereo broadcast in monaural. Select “OFF” to return to normal mode. • REG-ON/OFF (Regional) (page 13) 1 Press (MENU). To set A.SCRL, press (MENU) during CD Playback. 2 Press either side of (preset) repeatedly until the desired item appears. 3 Press the (+) side of (seek) to select the desired setting (Example: ON or OFF). 4 Press (ENTER). After the mode setting is completed, the display returns to normal play mode. Note The displayed item will differ depending on the source. Tip You can easily switch among categories (“SET," “DSPL," “SND," and “P/M") by pressing either side of ( PRESET) for 2 seconds. Selecting the sound position — My Best sound Position (MBP) When you drive without passengers, you can enjoy the most comfortable sound environment with “My Best sound Position.” “My Best sound Position” has two presets, which adjust the sound level of balance and fader. You can select one very easily with the MBP button. Display window Balance Level Fader Level Right Left Front Rear MBP-A - 4 dB 0 0 - 4 dB MBP-B 0 - 4 dB 0 - 4 dB MBP-OFF 0 0 0 0 Press (mbp) repeatedly for the desired listening position. ...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - CDX-L550V (1.79 mb)
Car-Receiver - CDX-L550X (1.79 mb)