Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Sony Dateigröße: 3.03 mb Dateiname: Unterrichtssprache:

This makes DAB almost immune to radio interference even in a moving object such as a car. Each DAB station bundles radio programmes (services) into an ensemble which it then broadcasts. Each service contains one or more components. All ensembles, services, and components are identified by name, so you can access any of them without having to know their frequencies. DAB programme Service 1 Service 1 -E Service \ Component | Component | M Component Notes • The DAB system is still in a testing phase. Some services have not been sufficiently defined or are presently being tested. At present, such services are not supported by the optional DAB tuner unit XT-100DAB. • DAB programmes are broadcast in Band-III (174 to 240 MHz) and L-Band (1,452 to 1,492 MHz), with each band divided into channels (41 in Band-III and 23 in L-Band). One ensemble is broadcast per channel by each DAB station. 19 Basic operations of DAB Searching for the ensemble and service — Automatic Tuning 1 Press (source) repeatedly to select the radio. 2 Press (mode) repeatedly to select “DAB.” 3 Press and hold either side of (seek) until “Seek +” or “Seek -” appears. DODD The unit will stop seeking when an ensemble is located. The unit will then automatically select the first service and display its name, and the display indicator will change from “Seek +”/“Seek —” to the service name. 4 Press either side of (seek) to select the desired service. Selecting the ensemble — Manual Tuning If you know the channel number of ensemble, follow the procedure below to tune in. Receiving the preset services Following procedure is available after presetting the service. For details on presetting the services, refer to “Presetting DAB services automatically,” (page 21) and “Presetting DAB services manually” (page 21). 1 Press (source) repeatedly to select the radio. 2 Press (mode) repeatedly to select “DAB.” 3 Press either side of (disc/preset) repeatedly to select the preset service. Tip There is another way to receive the preset service (preset on numbers 1 to 6). Press the number button (CD to CD) on which the desired service is stored. Refer to the level indication to check the receiving condition of the DAB programme. The level indication increases as the strength of the receiving signal increases. level 1 level 2 level 3 level 4 ___D__DO _ □ a □ □□□□ If no service of the selected programme type is available, “—” will be displayed. “—” will flash in the display if the reception is poor. Note To display the level indication, turn off the Motion Display (page 26). 1 Press (source) repeatedly to select the radio. 2 Press (mode) repeatedly to select “DAB.” 3 Press either side of (disc/preset) until “Ch. XXX” appears. 4 Press either side of (disc/preset) repeatedly until the desired channel number appears. 20 Presetting DAB services automatically — BTM The BTM (Best Tuning Memory) function picks out DAB ensembles and automatically assigns the services within the ensembles to preset service numbers. The unit can preset up to 40 services. If services have been previously set, the BTM function operates under the following conditions: • If you activate the BTM function while listening to a preset service, the unit will store detected services (by overwriting) only to preset numbers higher than that of the current present service. • If you activate the function while listening to a service that is not preset, the unit will replace the contents of all preset numbers. • In both cases above, if the unit detects a service that is identical to one already preset, the previously stored service remains unchanged and the newly detected service is not preset. 1 While listening to a DAB programme, 2 3 press (MENU). Press either side of ( disc/preset) repeatedly until “BTM” appears. Press (ENTER). A beep sounds when the service is stored. After activating the BTM function, the unit tunes the service assigned in the preset memory 1 automatically. Note If the unit can only tune in a few services, the BTM function may not assign services to all the preset service numbers. Presetting DAB services manually — Preset Edit You can also preset DAB services manually or delete a service which is already preset. Note that up to 40 services (preset either by the BTM function or manually) can be preset to the unit’s memory. 1 While listening to a DAB programme, press (MENU). 2 Press either side of (disc/preset) repeatedly until “PRS Edit” appears, then press (enter). 3 Select the service and the preset number you want to preset. o Press either side of (seek) to select the service. © Press either side of (disc/preset) to select the preset number. © Press (ENTER). The Preset Edit commands will appear in the display. □ □□□ DSO) :■■■. .. V. rn !■■■ !.■ ! ! ENTER j-' V: : LÉJ 4 Press either side of ( disc/preset) to select the desired command. 5 Press (ENTER). To edit other services, repeat steps 3 and 4. continue to next...

Herunterladen

Geben Sie zwei Ziffern: