Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Pioneer
Dateigröße: 815.68 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1. Press AUDIO to select the fader/balance mode. 2. Press 5 55 or . °° to adjust front/rear speaker balance. Each press of 5 or ° moves the front/rear speaker balance towards the front or the rear. • “FADER F25” – “FADER R25” is displayed as the front/rear speaker balance moves from front to rear. • “FADER FR00” is the proper setting when only two speakers are used. 3. Press 2 22 or 3 33 to adjust left/right speaker balance. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. • “BALANCE L25” – “BALANCE R25” is displayed as the left/right speaker balance moves from left to right. Using loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1. Press AUDIO and then press LOUD to select the loudness mode. 2. Press LOUD to turn the loudness on. “LOUDNESS ON” appears in the display. • Press LOUD again to turn loudness off. Using sound field control, octaver and BBER sound SFC (sound field control) incorporates four programs reproducing the typical sound field of a studio, club, concert hall or dome. This function makes it possible to reproduce the realistic sound fields of the four programs in your car. Octaver makes the bass sound louder. BBE sound processing technology makes music sound “live”. Highs are clearer, naturally brilliant and more finely detailed. Lows are tight, well defined and harmonically rich. Note: • Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc. ENGLISH 36 Audio Adjustments Audio Adjustments Recalling sound field programs 1. Press AUDIO and then press SFC to select the sound field control mode. 2. Press the corresponding button to select the desired sound field program. Button Effect STUDIO Studio CLUB Club HALL Concert hall DOME Dome OCT Octaver 1 and 2 BBE BBE • Press the same button again to cancel the selected sound field program. Switching the octaver setting You can switch the octaver setting. “OCTAVER2” has a stronger effect “OCTAVER1”. 1. Press AUDIO and SFC and then press OCT to select octaver. 2. Press 5 55 or . °° to switch the octaver setting. Each press of 5 or ° switches the octaver setting between 1 and 2. Adjusting BBE sound level For BBE sound processing technology, you can adjust the level of BBE. 1. Press AUDIO and SFC and then press BBE to select BBE. 2. Press 5 55 or . °° to adjust the level of BBE. Each press of 5 or ° increases or decreases the level of BBE. • “+4” – “–4” is displayed as the level is increased or decreased. Adjusting equalizer curves The factory supplied equalizer curves, with the exception of “FLAT”, can be adjusted to a fine degree (nuance control). 1. Press AUDIO and then press EQ1 to select the graphic equalizer mode. 2. Press 5 55 or . °° to adjust the equalizer curve. Each press of 5 or ° increases or decreases the equalizer curve respectively. • “+6” – “–6” is displayed as the equalizer curve is increased or decreased. Note: • The actual range of the adjustment differs depending on which equalizer curve is selected. • The equalizer curve with all frequencies set to 0 cannot be adjusted. • You can use 2 and 3 to select the desired equalizer curve. Adjusting 13-band graphic equalizer For “CUSTOM1” and “CUSTOM2” equalizer curves, you can adjust the level of each band. • A separate “CUSTOM1” curve can be created for each source. (The built-in CD and the multi-CD players are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than “CUSTOM2” is selected, the equalizer curve settings will be memorized in “CUSTOM1”. • A “CUSTOM2” curve can be created common to all sources. If you make adjustments when the “CUSTOM2” curve is selected, the “CUSTOM2” curve will be updated. 37 1. Recall the equalizer curve you want to adjust. Refer to “Recalling equalizer curves” on page 35. 2. Press AUDIO and then press EQ2 to select the 13-band graphic equalizer mode. 3. Press 2 22 or 3 33 to select the equalizer band to be adjusted. Each press of 2 or 3 selects equalizer bands in the following order: 50 i 80 i 125 i 200 i 315 i 500 i 800 i 1.25k i 2k i 3.15k i 5k i 8k i 12.5k (Hz) 4. Press 5 55 or . °° to adjust the level of the equalizer band. Each press of 5 or ° increases or decreases the level of the equalizer band. • “+6” – “–6” is displayed as the level is increased or decreased. • You can then select another band and adjust the level. Using automatic sound levelizer During driving, noise in the car changes according to the driving speed and road conditions. The automatic sound levelizer (ASL) monitors such varying noise and automatically increases the volume level, if the noise becomes greater. The sensitivity (variation of volume level to noise level) of ASL can be set to one of five levels. 1. Press AUDIO and then press ASL to select the automatic sound levelizer mode. 2. Press ASL to set the automatic sound levelizer sensitivity. Press ASL repeatedly to switch between the following settin...