Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
“FRT2” boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both “FRT1” and “FRT2” the “H” setting provides a more pronounced effect than the “L” setting. 1. Select the desired SFEQ mode. SFEQSELECT FRT1-H (front 1-high) = FRT1-L (front 1-low) = FRT2-H (front 2-high) = FRT2-L (front 2-low) = CUSTOM (custom) = SFEQ OFF (off) 2. Select the desired Position. SFEQSELECT LEFT (left) O CENTER (center) O RIGHT (right) Note: • If you adjust the bass or treble, “CUSTOM” memorizes an SFEQ mode in which the bass and treble are adjusted for personal preference. • If you switch the SFEQ mode, the H.P.F. function is automatically switched OFF. By switching the H.P.F. function ON after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ function. 41 Selecting the Equalizer Curve You can switch between Equalizer curves. • Select the desired Equalizer curve. EQ 1 2 3 4 5 6 ENGLISH POWERFUL (powerful) = NATURAL (natural) = VOCAL (vocal) = CUSTOM 1 (custom 1) = CUSTOM 2 (custom 2) = FLAT (flat) = SUPER BASS (super bass) About the Custom Curves “CUSTOM 1” and “CUSTOM 2” are adjustable equalizer curves. (Refer to “Equalizer Curve Adjustment” on page 44 and “Equalizer Curve Fine Adjustment” on page 45.) 7 CUSTOM 1 A separate “CUSTOM 1” curve can be created for each source. (The Built-in CD player and Multi-CD player are set to the same Equalizer Curve Adjustment setting automatically.) If you make adjustments when a curve other than “CUSTOM 2” is selected, the equalizer curve settings are memorized in “CUSTOM 1”. 7 CUSTOM 2 A “CUSTOM 2” curve can be created common to all sources. If you make adjustments when the “CUSTOM 2” curve is selected, the “CUSTOM 2” curve is updated. 42 Audio Adjustment Entering the Audio Menu With this Menu, you can adjust the sound quality. Note: • After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the Audio Menu is automatically canceled. • Audio Menu functions change depending on the Rear Output and Subwoofer Controller setting in the Initial Setting Menu. (Refer to “Setting the Rear Output and Subwoofer Controller” on page 55.) 1. Select the desired mode in the Audio Menu. Each press changes the Mode ... FUNC AUDIO 3 4 5 6 E B SFEQSELECT 2. Operate a mode. 3. Cancel the Audio Menu. FUNC AUDIO 3 4 5 6 E B SFEQSELECT Audio Menu Functions The Audio Menu features the following functions. Balance Adjustment (Fad) This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats. 1. Press the AUDIO button and select the Fader/Balance mode (Fad) in the Audio Menu. 2. Adjust front/rear speaker balance with the 5/. buttons. “Fad :F 15” – “Fad :R 15” is dis played as it moves from front to rear. 43 3. Adjust left/right speaker balance with the 2/3 buttons. “Bal :L 9” – “Bal :R 9” is displayed as it moves from left to right. Note: • (Refer to page 55.) • “Fad F/R 0” is the proper setting when 2 speakers are in use. Equalizer Curve Adjustment (EQ Low/EQ Mid/EQ High) You can adjust the currently selected equalizer curve settings as desired. 1. Press the AUDIO button and select the Equalizer mode (EQ Low/EQ Mid/EQ High) in the Audio Menu. 2. Select the band you want to adjust with the 2/3 buttons. EQ Low += EQ Mid += EQ High 3. Boost or attenuate the selected band with the 5/. buttons. The display shows “+6” – “–6”. ENGLISH When the Rear Output setting is “REAR SP:S.W”, you cannot adjust front/rear speaker balance. “CSTM” Note: • If you make adjustments when a curve other than “CUSTOM 2” is selected, “CUSTOM 1” curve is updated. ESPANOL DEUTSCH FRANCAIS ITALIANO NEDERLANDS 44 Audio Adjustment Equalizer Curve Fine Adjustment You can adjust the center frequency and the Q factor (curve characteristics) of each cur- rently selected curve band (EQ Low/EQ Mid/EQ High). Level (dB) Q=2N Q=2W Level (dB) Q=2N Q=2W Center frequency Frequency (Hz) 1. Press the AUDIO button for 2 seconds to select Equalizer Curve Fine Adjustment. 2. Press the AUDIO button to select the desired band for adjustment. 3. Select the desired frequency with the 2/3 buttons. LOW: 40 O 80 O 100 O 160 (Hz) MID: 200 O 500 O 1k O 2k (Hz) HIGH: 3.15k O8k O10k O12.5k (Hz) 4. Select the desired Q factor with the 5/. buttons. 2N += 1N += 1W += 2W Note: • If you make adjustments when a curve other than “CUSTOM 2” is selected, “CUSTOM 1” curve is updated. 45 Bass Adjustment (Bass) You can adjust the cut-off frequency and the Bass level. adjusted. 1. Menu. 2. Select the desired frequency with the 2/3 buttons. 40 O 63 O 100 O 160 (Hz) 3. Boost or attenuate the bass level with the 5/. buttons. The display shows “+6” – “–6”. Treble Adjustment (Treble) You can adjust the cut-off frequency and the Treble level. In “FRT1” and “FRT2” modes, treble adjustment affects only the front output: rear output cannot be adjusted. 1. Press the AUDIO button and select the Treble mode ...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - DEH-P7300R (2.21 mb)