Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
1 Pull out the ISO connectors from the car dashboard and connect them to the bigger end of the supplied standard connector. 2 Connect the other end of supplied standard connector to the unit. English EN Connect wires: without ISO connectors Caution 12 EN 213456789 13 3 Connect the supplied standard connector to the unit. .. If nec essary, do the other connections. (See the last step in section Connect wires: ISO connector) Connect radio antenna If your car has built-in radio antenna, connect it to the radio antenna of the system for better radio signal. 1 Connect the radio antenna on the back of the unit to the car antenna. English EN Connect reverse driving cable Connect parking brake wire Green/White 14 EN 15 2 Remove the two transport screws on the top of the unit. 3 Remove the mounting sleeve with the removal keys. 4 Install the sleeve into the dashboard and bend the tabs outward to ..x the sleeve. If the u .. nit is not ..xed by sleeve but by the supplied screws, skip this step. Mount in the dashboard Note .. For proper operation of the DVD player, the chassis must be mounted within 20 degree horizontal. Ensure that the unit is mounted within this limitation. 1 Ensure that car dashboard opening is within these measurements: 183 mm 53.5mm 5mm English EN 16 Attach the front panel 1 Attach the trim plate. 2 Insert the left side of the panel in the chassis until it is correctly engaged. 3 Press the right side of the panel toward the left and point the hole to the pillar on the right. 4 Release the panel to engage the right side. 5 Place the rubber cushion over the end of the bolt. 6 Slide the unit into the dashboard until a click sound is heard. 7 Reconnect the negative terminal of the car battery. EN 17 3 Close the battery compartment. Turn on Caution Risk of road accidents! • Never watch video or adjust settings while you drive. 1 Press to turn on the unit. » The screen below displays. » The available OSD (On-Screen Display) languages display. 5 Push the front side of the panel backward to the main unit until a “click” is heard. Install remote control battery Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased battery life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. • Perchlorate Material - special handling may apply. See perchlorate. For first-time use: 1 Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. English EN Select display language Set clock 18 EN 4 Listen to radio Tune to a radio station Select stereo/mono broadcasting EN 19 English Select AM tuner step Select tuner sensitivity 20 EN Tune by frequency Store stations manually Store radio stations in memory Store stations automatically EN 21 English Play with RDS Activate AF/TA/REG/CT functions Note Search for an RDS station by PTY information 22 EN RDS program types Tune to a preset station EN 23 English 24 Note Depends on where y • ou bought the unit, you can play DVD discs with one of the following region codes: Countries where you bought the unit Supported DVD region code China Asia Pacific, Taiwan, Korea Latin America Russia, India Insert USB device 5 Play Load discs You can play video, audio or images stored on the following discs: • DVD video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW 1 Press to open the front panel. 2 Insert the disc into the disc slot with label side facing up. » Play starts automatically. 3 Close the front panel. » After a few seconds, the screen turns on. 1 To remove the disc, press the button. » When the disc is ejected, the unit switches to radio mode automatically. Tip • If the disc is blocked in the disc compartment, press and hold until the disc comes out. EN 25 Play/Pause 1 Once the disc, USB or SDHC card is inserted, play starts automatically. For video d • iscs, if a menu appears: touch / to navigate through the menu, then touch on an item to start play. • For disc/USB/SD card that contain MP3s, WMAs, or JPEGs: touch / to navigate through the tracks/ pictures, then touch on an item to start play. 2 To pause, touch . • To resume play, touch . Search for a folder 1 Touch to return to playlist menu. 2 • For video files:Touch to display all available video files. • For audio files:Touch to display all available audios. • For picture files: Touch to display all available pictures. 3 Select and touch on a file. » The selected file starts to play. • To skip to previous/next chapter/track, touch / . Search within a track 1 During play, press and hold / on the remote control. » Search fast-backward/forward within the track. 1 Slide the USB socket cover to the left. 2 Insert the USB device into the USB socket. » The unit starts playing from the USB d...