Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 2.67 mb Dateiname: Unterrichtssprache:

Connector Connect to 1 ANTENNA Antenna 2 FRONT LINE OUT R Front right (Socket) speaker 3 FRONT LINE OUT L Front left speaker (Socket) Tip • The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Be sure to make proper connections to prevent damage to the unit. • OE REMOTE adaptor for SWC (Steering Wheel Control) is not supplied. Mount into the dashboard 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car batter y. • If you disconnect the car batter y in a car that has an on-board drive or navigation computer, the computer may lose its memor y. • If the car batter y is not disconnected, to avoid shor t-circuit, ensure that the bare wires do not touch each other. 2 Ensure that car dashboard opening is within these measurements: RL 183 mm 53mm 5mm 8 EN 9 English EN 3 Remove the mounting sleeve with the supplied disassembly tools. 4 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Note •• If the unit is not fixed by sleeve but by the supplied screws, skip this step. 5 Place the supplied rubber cushion over the end of the mounting bolt. 183 mm 53.5 mm 6 Slide the unit into the dashboard until you hear a click sound. 7 Reconnect the negative terminal of the car battery. Attach the front panel 1 Attach the trim plate. 2 Insert the right side of the panel in the chassis until it is correctly engaged. 3 Press the left side of the panel until the mechanism locks it into place. Set clock format Turn on To turn on the unit, • Press . To turn off the unit, • press and hold until the unit is turned off. Select country/region Note • Select correct countr y/region for this unit, otherwise the unit can not work properly. 1 Press to turn the unit on. » [SELECT OPERATING REGION] is displayed. 2 Rotate to select an option: • [USA] (United States) • [LATIN] (Latin America) • [EUROPE] (Western Europe) • [RUS] (Russia) • [M-EAST] (Middle East) • [ASIA] (Asia Pacific) • [JAP] (Japan) • [AUST] (Australia) 3 Press to confirm. Set clock 1 Press MENU repeatedly until current time is flashed. 2 Rotate 3 Press 4 Rotate 5 Press to set hour. to confirm. to set minute. to confirm. 1 Press MENU. 2 Press or repeatedly until [CLOCK FORMAT] is displayed. 3 Rotate to select a setting: • [CLOCK 12H] • [CLOCK 24H] View clock In any mode, press and hold MAX SOUND until the clock is displayed. • Press any key to cancel the clock display. 10 EN 4 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select radio mode. 2 Press BAND or / repeatedly to select band: [FM1],[FM2], [FM3], [AM1], or [AM2]. 3 Press and hold or until the frequency digit is flashed. 4 Press or to tune to a radio station manually. » The radio station is broadcast. • To search for a radio station automatically, press or . Select tuner region You can select suitable countr y/region of the radio. 1 Press SOURCE to select radio mode. 2 Press MENU repeatedly until [AREA] is displayed.. 3 Rotate to select: • [USA] (United States) • [LATIN] (Latin America) • [EUROPE] (Western Europe) • [RUS] (Russia) • [M-EAST] (Middle East) • [ASIA] (Asia Pacific) • [JAP] (Japan) • [AUST] (Australia) 4 Press to confirm. Select tuner sensitivity To receive more radio stations or only stations with strong signal, you can adjust the tuner sensitivity. 1 Press MENU repeatedly until [LOCAL] is displayed. 2 Rotate to select a setting: • [LOCAL ON] (local on): only stations with strong signal can be broadcast. • [LOCAL OFF] (local off): stations with strong and weak signals can be broadcast. Store radio stations in memory You can store up to 6 stations in each band. Store stations automatically 1 In Radio mode, press and hold DBB until [STORE - - -] is displayed. 2 Press to confirm. » The six strongest stations of the selected band are saved in preset channel automatically. Store stations manually 1 Tune to a station that you want to store. (see 'Tune to a radio station' on page 11) 2 Press a numeric button for 3 seconds. » The station is saved in the selected channel. Tune to a preset station 1 Press BAND to select band. 2 Press a numeric key to select a preset station. English EN 11 Play with RDS The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, the station name are displayed. RDS is only available for 87 5MHz-108.0MHz. Turn on RDS Note • The default setting for RDS is on. 1 Press MENU. 2 Press or repeatedly until [RDS] is displayed. 3 Rotate to select [RDS ON]. » The RDS function is turned on. Select program type Before tuning to RDS stations, you can select program type and let the unit search only for programs of the selected categor y. 1 Press MENU. 2 Press or repeatedly until [PTY] is displayed. 3 Press to confirm. 4 Rotate to select a type, then press to confirm. Item Program type Description 1 NEWS News ser vices 2 AFFAIRS Politics and current affairs 3 INFO Special information ...

Herunterladen

Geben Sie zwei Ziffern: