Anleitung Kenwood, modell XXV-01D
Hersteller: KenwoodDateigröße: 1.58 mbDateiname:
Unterrichtssprache:
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• You can control this item when Speaker Select Subwoofer of (page 13) is set to any item other than "None". Sound Field Control 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "S.F.C" appears. Refer to (page 9). 3 Enter Sound Field Control mode Turn the [VOL] knob to select "S.F.C". Press the [VOL] knob. • To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the (page 13). • When "2ZONE" of (page 11) is ON, you cannot select "S.F.C". 4 Select the Sound Field Control item to adjust 1 Turn the [VOL] knob to select the item you want to select. Press the [VOL] knob. 2 Press the Control knob. 3 Push the Control knob towards [FM] or [AM]. 1 2 3 Sound Field control item "X'Over" "HPF Front" "fc" "SLP" Front High Pass Filter Frequency Front High Pass Filter Slope "HPF Rear"*. "fc" "SLP" Rear High Pass Filter Frequency Rear High Pass Filter Slope "LPF SubWoofer"*. "fc" "SLP" "Phase" Subwoofer Low Pass Filter Frequency Subwoofer Low Pass Filter Slope Subwoofer Low Pass Filter Phase "DTA" "DTA Front" DTA Front "DTA Rear"*. DTA Rear "DTA SubWoofer"*. DTA Subwoofer "POSI" Position Setting "Preset" Preset value storage/recalling • "Preset": You can store an adjusted sound control value by selecting "Memory". Refer to (page 16). Also, you can recall it by selecting "Recall". Refer to (page 16). • You can adjust "SubWoofer" when (page 12) is set to "SUBWOOFER ON". • X'Over (Crossover Network Setup) You can manually set a crossover frequency for the speakers. • DTA (Digital Time Alignment) Manually set the sound output timing of each channel. • *1 You can control this item when Speaker Select Rear of (page 13) is set to any item other than "None". • *2 You can control this item when Speaker Select Subwoofer of (page 13) is set to any item other than "None". 5 Adjust the Sound Field Control item Push the Control knob towards [4] or [.]. Each time you push the knob, the setting alternates between the settings shown in the table below. Sound Field Control Item Range Front High Pass Filter Frequency/ Rear High Pass Filter Frequency Through/30 — 100/120/150/ 180/220/250 (Hz) Front High Pass Filter Slope/ Rear High Pass Filter Slope/ Subwoofer Low Pass Filter Slope -12/-18/-24 dB/Oct Subwoofer Low Pass Filter Frequency 30 — 100/120/150/180/220/ 250 (Hz)/Through Subwoofer Low Pass Filter Phase Normal/ Reverse English | 13 DTA Front/DTA Rear DTA Subwoofer 0 — 20.33 (feet) Position Setting Front-Left/ Front-Right/ Front/ ALL • When the "2ZONE" of (page 11) is "ON", the following setups are ignored. - "X'Over" - "DTA" - "POSI" - "Preset" 6 Exit Sound Field Control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Sound Management system 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "S.M.S" appears. Refer to (page 9). 3 Enter Sound Management mode Turn the [VOL] knob to select "S.M.S". Press the [VOL] knob. • When "2ZONE" of (page 11) is ON, you cannot select "S.M.S". 4 Select the Sound Management item to adjust Turn the [VOL] knob to select the item you want to select. Press the [VOL] knob. Multi-function item Sound Management Item "Cabin" Cabin Setting "Front" Speaker Select Front "Rear" Speaker Select Rear "Sub-W" Speaker Select Subwoofer "Preset" Preset value storage/recalling • "Preset": You can store an adjusted sound control value by selecting "Memory". Refer to (page 16). Also, you can recall it by selecting "Recall". Refer to (page 16). 5 Adjust the Sound Management item Push the Control knob towards [4] or [.]. Each time you push the knob, the setting alternates between the settings shown in the table below. Sound Managemnt Item Range Cabin Setting OFF/ Compact/ Full Size Car/ Wagon1/ Wagon2/ Minivan1/ Minivan2/ SUV/ Minivan (Long) Speaker Select Front 6 . / 6 . / 7/ 4x6/ 5x7/ 6x8/ 6x9/ 7x10/ O.E.M./ 4/ 5 (inch) Speaker Select Rear 6 . / 6 . / 7/ 4x6/ 5x7/ 6x8/ 6x9/ 7x10/ None/ O.E.M./ 4/ 5 (inch) Speaker Select Subwoofer 6 . / 8/ 10/ 12/ 15over/ None (inch) 6 Exit Sound Managemnt mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. 14 | English General features Equalizer Control 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "EQ" appears. Refer to (page 9). 3 Enter Equalizer Control mode Turn the [VOL] knob to select "EQ". Press the [VOL] knob. • When "2ZONE" of (page 11) is ON, you cannot select "EQ". 4 Select the Equalizer Control item to adjust Turn the [VOL] kno...
)
