Anleitung Kenwood, modell KDC-X891
Hersteller: KenwoodDateigröße: 686.78 kbDateiname:
Unterrichtssprache:
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
4 Setup the Audio item Turn the [VOL] knob. Adjustment Item Display Range Front High Pass Filter "HPF-F Fc" Through/40/60/80/100/120/ 150/180/220 Hz Rear High Pass Filter "HPF-R Fc" Through/40/60/80/100/120/ 150/180/220 Hz Low Pass Filter "LPF-SW Fc" 50/60/80/100/120/Through Hz Subwoofer Phase "SW PHASE" Reverse (180°)/ Normal (0°) Volume offset "VOL-OFFSET" –8 — ±0 (AUX: -8— +8) Loudness "LOUD" OFF/ON Dual Zone System "2 ZONE" OFF/ON . • Volume offset: Sets each source’s volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. -Set up the channel of sub source by (page 38). -Select Main source by [SRC] button. -Adjust the volume of Front channel by [VOL] knob. -Adjust the volume of Rear channel by (page 8). -The Audio Control has no effect on sub source. • You can use the Dual Zone System with the internal auxiliary input. 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. English | 9 General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Refer to (page 7). 2 Enter Speaker Setting mode Press the [VOL] knob. "SP SEL" is displayed. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type Display OFF "OFF" For 5 & 4 in. speaker "5/4inch" For 6 & 6x9 in. speaker "6x9/6inch" For the OEM speaker "O.E.M." 4 Exit Speaker Setting mode Press the [VOL] knob. Subwoofer Output Turning the Subwoofer output ON or OFF. Push the Control knob toward down for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF. When it is ON, "SUB WOOFER ON" is displayed. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. . • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 47). Function Control mode To set up various functions of this unit, select tree- structured function items. 1 Enter Function Control mode Press the [FNC] button. 2 Select your desired setup item Select a setup item using the Control knob. Operation type Operation Movement between Turn the Control knob. items Selection of item Press the Control knob. Return to previous item Press the [FNC] button. Functions of items are as follows: Display Icon Function of setup item "Menu" "MENU" Allows you to set up the environment. Refer to (page 34). "Display Select" "DISP" Allows you to set up the display. Refer to page 11 to page 18. "Angle Adjust" "ANGLE" Allows you to set the panel angle. Refer to (page 19). "Preset Memory" "P.MEM" Allows you to put stations in the memory. Refer to (page 22). "File Scan" etc. "SCAN" Allows you to set how to play the CD and etc. audio file. Refer to (page 28). "Return" " " Returns to the previous item. 3 Select an option for the selected item Refer to the related pages for the operation of each option. 4 Exit Function Control mode Press the [FNC] button for at least 1 second. 10 | English Display Type Selection Changing the display mode. 1 Enter Display Type Selection mode Using the Control knob, select "DISP" > "TYPE". For the operation method, refer to (page 10). 2 Select the display Type Turn the Control knob. Select from the following display types: Display Mode Display "TYPE SELECT [A]" 12 7 "TYPE SELECT [F]" 9 1 Graphic display part 2 Status display 3 Text display part 4 Upper text display part 5 Middle text display part 6 Lower text display part 7 Text display part 8 Graphic display part 9 G-Analyzer display part 0 Text icon display part ! Source icon display part 3 Exit Display Type Selection mode Press the Control knob. . • To change the information by the Display Type, refer to the page on the following table for the methods to alternate by the Display Type. Display Type A B C D E F Graphic 1 12 12 ———— Status 2 11 11 — — — — Text 3 — 12 — — — — Upper 4 — — 13 13 — — Middle 5 — — 13 13 — — Lower 6 — — 13 13 — — Text 7 ———— 12 — G-Analyzer 9 ————— Display Type A/ Display Type B Status Setting Determine whether the On and Off statuses of various functions are to be displayed on the Display Type A/B. 1 Enter Status Set...
)
