Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Kenwood Dateigröße: 1.21 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KDC-X791 (1.21 mb)

Cancelling File Select Press the [FNC] button. . • Even when the iPod is connected, you can change the operation method from to . Refer to (page 34). 26 | English Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. . • When the (page 35) is set to OFF, the display may black out while scrolling. English | 27 Satellite Radio tuner control features SRCFNC AUTO 1 - 6 FMAM .... Control knob Band display Channel number Function icon Select Satellite Radio Mode Selecting the Satellite Radio Tuner (optional accessory) connected to this unit. Selecting Satellite Radio Mode Press the [SRC] button. Select the "SAT" display. Refer to (page 7). . • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if "CALL TO SUBSCRIBE" appears. • The radio may take a little time to start receiving after you select the Satellite Radio source. • If the signal reception fails, "Acquiring Signal" appears. Switching Seek Mode Sets the seeking mode. Press the [AUTO] button. Each time you press the button, the Seek mode alternates between the operations shown in the table below. Display Operation "Seek : Channel" Normal manual seeking control. "Seek : Preset" Search in order of the channels in the Preset memory. Select the channel Selecting the channel. Push the Control knob towards [4] or [.]. 28 | English Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the Control knob. 2 Select the Category Push the Control knob towards up or down. . • It is the item when the category of Middle text display part is selected. 3 Select the Channel Push the Control knob towards [4] or [.]. . • You cannot Channel search until the category information is acquired. Cancelling Category and Channel Search mode Press the Control knob. Function of remote control Direct Access Tuning Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. 2 Enter the channel Press the number buttons. 3 Do Channel Search Push the Control knob towards [4] or [.]. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. . • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears. Selecting the Preset Band Push the Control knob toward [FM]. Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4. Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Push the Control knob toward [FM]. 2 Select the channel to put in the memory Push the Control knob towards [4] or [.]. 3 Enter Preset Memory mode Using the Control knob, select "P.MEM". For the operation method, refer to (page 10). 4 Select the number to put in the memory Turn the Control knob. 5 Determine the number to put in the memory Press the Control knob. 6 Allow the determined number to take effect Press the Control knob. Cancelling the Preset Memory mode Press the [FNC] button. . • Only the channel number is stored. Category information is not stored. • This function can be operated with [1] — [6] button. -Press the desired [1] — [6] button for at least 2 seconds. English | 29 Satellite Radio tuner control features Preset Tuning Recalling the channels in the memory. 1 Select the preset band Push the Control knob toward [FM]. 2 Enter Preset Tuning Select mode Turn the Control knob. 3 Select a desired station in the memory Turn the Control knob. 4 Recall the station Press the Control knob. Cancelling Preset Tuning Press the [FNC] button. . • This function can be operated with [1] — [6] button. - Press the desired [1] — [6] button. Channel Scan Checks every receivable Channel for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks. 2 Release the button when the music you want to hear is received Press the [AUTO] button for at least 2 seconds. Text Scroll for Satellite Radio source Scrolls the displayed channel name and other items. Push the Control knob toward up for at least 2 seconds. . • When the (page 35) is set to OFF, the display may black out while scrolling. 30 | English HD Radio control features AUTO/AME 1 - 6 FMAM .... Control knob FNC SRC ST indicator Band display Preset station number Frequency display Function icon About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change....

Herunterladen

Geben Sie zwei Ziffern: