Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
2 Operate the cell-phone to send the phone book data to this unit By operating the cell-phone, download the phone book data to this unit. • During downloading: “Downloading” is displayed. • After completion of downloading: “Completed” is displayed. 3 Operate the cell-phone to start the hand-sfree connection. Clearing the downloading completion message Press any button. . • Up to 1000 phone numbers can be registered for each registered cell-phone. • Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.) • To cancel downloading of the phone book data, operate the cell-phone. English | 27 Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory) Bluetooth Setup Selecting the Bluetooth device You Wish to Connect When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Bluetooth device selection mode The item can be selected and determined as follows. ”Settings” . “Phone Selection” (to select the cellphone) or “Audio Selection” (to select the audio player) To select the item, turn the Control knob. To determine the item, press the [ENTER] button. “(name)” is displayed. 4 Select the Bluetooth device Turn the Control knob. 5 Set up the Bluetooth device Press the [ENTER] button. ‘.(name)’ or ‘-(name)’ is displayed. “.”: The selected Bluetooth device is busy. “-”: The selected Bluetooth device is on standby. “ “ (blank): The Bluetooth device is deselected. 6 Exit Bluetooth mode Press the [SRC] button. . • If a cell-phone is already selected, deselect it, and then select a different one. • If you cannot select a device using the audio player, connect the device with the audio player. Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Bluetooth device deletion mode The item can be selected and determined as follows. ”Settings” . “Detailed Settings” . “Device Delete” To select the item, turn the Control knob. To determine the item, press the [ENTER] button. Device name is displayed. 4 Delete the selected Bluetooth device Turn the Control knob to select desired device name, and then press the [ENTER] button. 5 Turn the Control knob to select “YES”, and then press the [ENTER] button. “Completed” is displayed. 6 Exit Bluetooth mode Press the [SRC] button. . • When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted. 28 | KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Displaying the Firmware Version Display the version of the firmware of this unit. 1 Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Bluetooth Firmware update mode The item can be selected and determined as follows. ”Settings” . “Detailed Settings” . “BT F/W Update” To select the item, turn the Control knob. To determine the item, press the [ENTER] button. The firmware version appears. 4 Exit Bluetooth mode Press the [SRC] button. . • For how to update the firmware, access our web site. Function of KCA-BT200 (Optional Accessory) Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Phonebook name edit mode The item can be selected and determined as follows. ”Settings” . “Voice Tag” . “PB Name Edit” To select the item, turn the Control knob. To determine the item, press the [ENTER] button. 4 Search for the name to register Turn the Control knob to select name, and then press the [ENTER] button. If a voice tag has already been registered for a name, “*” is displayed before the name. 5 Select a mode Turn the Control knob. “Register” Register a voice tag. “Check”* Play a voice tag. “Delete”* Delete a voice tag. Display Operation *Displayed only when a name for which a voice tag has been registered is selected. Selecting “Register”(Regist) 6 Register a voice tag (first) Press the [ENTER] button. When you hear a beep, speak the voice tag within 2 seconds. 7 Confirm the voice tag (second) Press the [ENTER] button. When you hear a beep, speak the same voice tag again within 2 seconds. ...