Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
. Hiding the unit with the ignition turned on (forced closing): Hold down the SRC button for one second or more. The faceplate will reverse, hiding the unit. The unit will turn off. NOTE • During the forced closed whilst ignition no matter how often touch-sensitive spot” order to open it. You can prevent tampering letting someone else drive way. To cancel the stealth retraction unit and open control panel: Press “the touch-sensitive spot” at the (as illustrated) Touch-sensitive spot NOTE Touch-sensitive spot The invisible switch is hiding behind the touch-sensitive spot. Press the hollow spot (invisible switch) to open. • When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly. • Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit. — 9— Basic operations (See page 6) Switching Modes Attenuator English Switching Modes: Each time you press follows: t Tuner mode t CD mode t Disc control mode This function allows Turning Attenuator On/ Press the ATT button to switch When the attenuator is on, When the attenuator is off, the level. NOTE Turning down the volume all the way turns function. NOTE cannot be used. • The disc control mode will differ depending on the unit connected. • The mode switches to the next mode from any Volume Increasing Volume: Press the ubutton to turn up the volume. Decreasing Volume: Press the dbutton to turn down the volume. Loudness This function amplifies low and high tones when the is turned down. The LOUD indicator lights up, when the loudness function on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. Menu System To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page. 1 Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displayed. — 10 — 2 Selecting function Press the . button to search through see the one you want Press the 4 button to search through backward. Example: If you want to switch the tuning to manual, first search through you see "AUTO 1" in the display. MENU AUTO 1 AUTO 1 for KDC-PS9060R for KDC-8060R/7060R 3 Changing setting for currently displayed Press either the AM or FM button. The setting will change for each function. Example: The tuning mode will switch from AUTO 2. Pressing the button again switches the setting to manual, and "MANUAL" is displayed. AUTO 2 MANUAL 4 Ending the menu mode Press the MENU button. NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. • The News function turns on when the setting is made for the news interruption interval. The "##MIN" display indicates the setting selected for the news interruption timeout interval. • The "##" display indicates the setting value. Varieties of settings Function each function (display) Switching Clock Display Time Adjustment (Manual)
Car-Receiver - KDC-7060R (442.93 kb)
Car-Receiver - KDC-8060R (442.93 kb)