Anleitung Kenwood, modell KDC-MP728
Hersteller: KenwoodDateigröße: 2.4 mbDateiname:
Unterrichtssprache:
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Loudness: Compensating for low and high tones during low volume. • *1 You can control this item when (page 43) is set to "SWPRE Sub-W". (KDC-MP728/ MP628 only) • *1 You can control this item when (page 14) is set to "SW ON". • *2 You can control this item when "2 ZONE" of is set to "OFF". • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - The channel of sub source is set up by (page 45). - Main source is selected by [SRC] button. - The volume of Front channel is adjusted by [VOL] knob. - The volume of Rear channel is adjusted by (page 10). - The Audio Control has no effect on sub source. • The Dual Zone System can be used with the Auxiliary input sources shown below. - Internal auxiliary input 5 Exit Audio Setup mode Press [VOL] knob for at least 1 second. English | 13 Function of the KDC-X889/KDC-MP828 Audio Setup Setting the Sound system, such as Volume offset and Dual Zone. 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Setup the Audio item Turn the [VOL] knob. Adjustment Item Display Range Volume offset "Vol-Offset" –8 — 0 Dual Zone System "2 ZONE" OFF/ON • Volume offset: Each source’s volume can be set as a difference from the basic volume. • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - The channel of sub source is set up by (page 45). - Main source is selected by [SRC] button. - The volume of Front channel is adjusted by [VOL] knob. - The volume of Rear channel is adjusted by (page 12). - The Audio Control has no effect on sub source. • The Dual Zone System can be used with the Auxiliary input sources shown below. - Internal auxiliary input • The Dual Zone System can be used only when you have set the rear speaker to any mode other than "None" in the (page 15). • When the "2 ZONE" is ON, each of the following setup is ignored. - (page 14) - (page 15) - (page 16) - (page 17) - (page 17) • ODD D/A System is not effective when the "2 ZONE" is ON. Function of the KDC-MP7028/KDC-MP728/KDCX789/ KDC-MP628 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. "SP SEL" is displayed. 3 Select the Speaker type Turn the [VOL] knob. Each time the knob is turned, the setting switches as shown below. Speaker type Display OFF "OFF" For 5 & 4 in. speaker "5/4 inch" For 6 & 6x9 in. speaker "6x9/6 inch" For the OEM speaker "O.E.M." 4 Exit Speaker Setting mode Press the [VOL] knob. 5 Exit Audio Setup mode Press [VOL] knob for at least 1 second. 14 | English General features Function of the KDC-X889/KDC-MP828 Sound Field Control 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.F.C" is displayed above the [1] button. Refer to (page 9). 3 Enter Sound Field Control mode Press the [1] ("S.F.C") button. • When "2 ZONE" of (page 13) is ON, you cannot select "S.F.C". 4 Select the Sound Field Control item for adjustment Press the [1] — [3] and [5] button. Each time the [1] — [3] and [5] button is pressed, the adjustable audio items are switched among ranges of all stage section’s tables on the following pages. Multi-function key operation Sound Field control item [1] "XOver" [1] "Front"* [1] "Rear"* [1] "SW"* High Pass Filter Front High Pass Filter Rear Low Pass Filter Subwoofer [2] "DTA" [2] "Front" [2] "Rear" [2] "SW" DTA Front DTA Rear DTA Subwoofer [3] "POSI" Position Setting [5] "Preset" [1] "CALL" [2] "MEM" Call mode Memory mode • * The following adjustment items can be selected by [FM] or [AM] knob for "XOver". [1] "XOver" "Front" Front High Pass Filter Center "Rear" "SW" Front High Pass Filter Slope Rear High Pass Filter Center Rear High Pass Filter Slope Subwoofer Low Pass Filter Center Subwoofer Low Pass Filter Slope [FM] or [AM] Knob Subwoofer Low Pass Filter Phase • "Preset": You can store an adjusted audio control value by selecting "MEM". Refer to (page 18). Also, you can recall it by selecting "CALL". Refer to (page 18). • "SW" can be adjusted when (page 14) is set to "SW ON" • Xover (Crossover Network Setup) You can manually set a crossover frequency of speakers. • DTA (Digital Time Alignment) Manually set the sound output t...
Dieses Handbuch ist für folgende Modelle:
Car-Receiver - KDC-MP628 (2.4 mb)
Car-Receiver - KDC-MP7028 (2.4 mb)
Car-Receiver - KDC-MP828 (2.4 mb)
Car-Receiver - KDC-X789 (2.4 mb)
)
