Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 990.29 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KDC-MP6036 (1.03 mb)

1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob towards [4] or [.]. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Select 1 of them as the setting. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. . • When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.) Also, the explanation for items that are not applicable ( etc.) are entered step by step. In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. 16 | English . • When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards [4] or [.]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat step 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 operation, and reenter the security code. "APPROVED" is displayed. The Security Code function activates. 9 Exit Security Code mode Press the [MENU] button. . • If you enter a Code different from your Security Code, you have to start over from step 4. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and reenter the security code. "APPROVED" is displayed. Now, you can use the unit. . • If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. Number of times the incorrect code was input Input prohibited time 1— 2 5 minutes 3 1 hour 4 24 hours In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [.]. 4 Exit Clock adjustment mode Press the [MENU] button. English | 17 Menu system In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display Setting "DSI ON" LED flashes. "DSI OFF" LED OFF. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display Setting "DISP ON" Keeps the display on. "DISP OFF" Turns off the display when you perform no operation for 5 seconds. . • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Turning off the power • During function control, such as the Menu System, the display stays on. Dimmer You can lower the brightness of the display by using the dimmer function. Display Setting "DIM ON" The display dims. "DIM OFF" The display doesn’t dim. In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used. Display Setting "SPRM ON" Plays sound using the Supreme function. "SPRM OFF" Plays the original sou...

Herunterladen

Geben Sie zwei Ziffern: