Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 1003.37 kb Dateiname: Unterrichtssprache:

• To use the Phone Book, it must be downloaded to this unit in advance. For details, see (page 29). • “BT” indicator is lit when a cell-phone is connected to this unit. Receiving a call Answering a Phone Call Press the [AUD] button. . • The following operations disconnect the line: -Insert a CD. -Connect a USB device. • The name of the calling party is displayed if it has already been registered in the Phone Book. Rejecting an Incoming Call Press the [SRC] button or press the [ ] button for at least 1 second. During a call Disconnecting a Call Press the [SRC] button or press the [ ] button for at least 1 second. Switching to the Private Mode Press the [38] button. Switches between Private talk (“PRIVATE TALK”) and Hands-free talk (“HANDS FREE”) each time this button is pressed. . • Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your cell-phone to return to the hands-free talk mode. Adjusting the Voice Volume during a Call Turn the [AUD] knob. Call waiting Answering Another Incoming Call with the Current Call Suspended 1 Press the [AUD] knob. 2 Turn the [AUD] knob or push it towards up or down. Select the “ANSWER” display. 3 Press the [AUD] knob. Answering another Incoming Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Continuing the Current Call 1 Press the [AUD] knob. 2 Turn the [AUD] knob or push it towards up or down. Select the “REJECT” display. 3 Press the [AUD] knob. Answering the Waiting Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Switching between the Current Call and Waiting Call Press the [AUD] knob. Each pressing of this knob switches the calling party. Other functions Clearing the Disconnection Message Press the [ ] button. “HF DISCONCT” disappears. Switching between Display Modes Press the [38] button for at least 1 second. Pressing this button each time switches between name and telephone number. 16 | KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U Making a call 1 Enter dialing method mode Press the [ ] button. 2 Select a dialing method Press the [AUD] knob. “NUMBER DIAL” » “PHONE BOOK1” » “PHONE BOOK2” » “OUT-CALL” » “IN-CALL” » “MISSED CALLS” Methods of operations in the above modes are described below. 3 Exit the dialing method mode Press the [ ] button. Dial a number 1 Enter dialing method mode Press the [ ] button. 2 Select the number dial mode Press the [AUD] knob. Select the “NUMBER DIAL” display. 3 Enter a phone number Press the number ([1] – [0]), #([FM]), *([AM]), or +([.]) button on the remote controller. 4 Make a call Press the [DIRECT] button on the remote controller. To erase the entered phone number digit by digit: Press the [4] button on the remote controller. . • You can input max 32 digits. Speed dialing (Preset dial) 1 Enter dialing method mode Press the [ ] button. 2 Press the [AUD] knob. Select the “NUMBER DIAL” display. 3 Enter preset dial mode Press the [SEARCH] button. 4 Select the number you want to recall from the memory Turn the [AUD] knob or push it towards up or down. 5 Press the [AUD] knob. Phone number is displayed. 6 Make a call Press the [AUD] knob for at least 1 second. . • You need to register the preset dial number. (page 18) Calling a number in the Phone Book 1 Enter dialing method mode Press the [ ] button. 2 Select the Phone Book mode Press the [AUD] knob. Select the “PHONE BOOK1” display, proceed to step 3. Select the “PHONE BOOK2” display, proceed to step 4. 3 Select the initial to be searched for Operation type Operation Move to the next character. Turn the [AUD] knob or push it towards right or left. Move to the next row. Push the [AUD] knob towards up or down. Determine the selected initial. Press the [AUD] knob for at least 1 second. 4 Select the name Operation type Operation Move to the next phone Turn the [AUD] knob or push it towards number. up or down. Move to the next name. Push the [AUD] knob towards right or left. 5 Make a call Press the [AUD] knob for at least 1 second. . • During search, a non-accent character such as “u” is searched for instead of an accent character such as “u”. English | 17 Function of KDC-BT6544U/BT6544UY/BT6044/BT6144 Operation of hands-free phoning Calling a number in the call log 1 Enter dialing method mode Press the [ ] button. 2 Select the call log mode Press the [AUD] knob. Select the “OUT-CALL” (outgoing call), “IN-CALL” (incoming call), or “MISSED CALLS” (missed call) display. 3 Select a name or phone number Turn the [AUD] knob or push it towards up or down. 4 Make a call Press the [AUD] knob for at least 1 second. . • The outgoing call list and the incoming call list, and the missed call list are the lists of ca...

Herunterladen

Geben Sie zwei Ziffern: