Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Kenwood Dateigröße: 1.02 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KDC-BT40U (1.07 mb)

3 Select the function item Turn the [VOL] knob and it when the desired item is displayed. Select “SETTINGS” > Function item or select “SETTINGS” > “DETAILED SET” (“DETAIL SET”) >> [..] / [..][ ] [ ] Function item. Function item Selectable setting/item “PHONE SELECT” (“PHONE SEL”) Selects a cell-phone connection. Refer to (page 23). “SMS DOWNLOAD” (“SMS DL”) Download a short message. Refer to (page 23). “SMS INBOX” Display the received short message. Refer to (page 24). “VOICE TAG” Registers voice for voice recognition and voice to select the Phone number category in Phone book. Refer to (page 24) and (page 25). “DETAILED SET” (“DETAIL SET”) Move to detailed item. “DEVICE REGIST” (“DVC REGIST”) Registers a Bluetooth device (pairing). Refer to (page 21).“S-DVC SELECT” (“S-DVC SEL”) “DEVICE DELETE” (“DVC DELETE”) Cancel registration of the Bluetooth device. Refer to (page 21). “PIN CODE EDIT” (“PIN EDIT”) Specify the PIN code required when registering this unit using the Bluetooth device. Refer to (page 22). “AUTO ANSWER” This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. OFF: Does not answer the phone call automatically. 0: Automatically answers the phone call at once. 1 – 8 –99: Automatically answers the phone call after lapse of 1 – 99 seconds. “BT SP SELECT” You can specify the audio output speakers. (“BT SP SEL”) Select the speaker which is further from the microphone in order to prevent howling or echoes. SP FRONT: Outputs audio from the front-left and front-right speakers. SP ALL: Outputs audio from the all speakers. “CALL BEEP” You can output a beep from the speaker when a call comes in. ON: Beep is heard. OFF: Beep is canceled “BT F/W UPDATE” (“BT UPDATE”) Display the firmware version and update the firmware. Refer to (page 22). “MIC GAIN” Adjust the sensitivity of the built-in microphone for a telephone call. Adjust the voice of caller. Setting to “+” increases the voice volume. –3 – 0 – +3 “NR LEVEL” Reduce the noises generated by surrounding environment without changing the built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise reduction. –3 – 0 – +3 “EC LEVEL” Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction. –2 – 0 – +2 (Factory setting: Underlined) 4 Make a setting Turn the [VOL] knob and press it when the desired item is displayed. 5 Exit Function Setting mode Press the [ ] button for at least 1 second. 20 | KDC-BT40U/KDC-BT30 Registering Bluetooth Device (Pairing) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Select Bluetooth device registration mode For how to select setup item, refer to (page 20). Select “SETTINGS” > “DETAILED SET” (“DETAIL SET”) > >> “DEVICE REGIST” (“DVC REGIST). 2 Enter Bluetooth device registration mode Press the [VOL] knob. Search for the Bluetooth device. When search is completed, “FINISHED” is displayed. 3 Select the Bluetooth device Turn the [VOL] knob and press it when the desired Bluetooth device name is displayed. 4 Input the PIN code Operation type Operation Select the numbers. Turn the [VOL] knob. Move to the next digit. Press the [.] button. Delete the last digit. Press the [4] button. 5 Transmit the PIN code Press the [VOL] knob. If “PAIRING OK” is displayed, registration is completed. If the error message appears even though the PIN code is correct, try Registering Special Bluetooth device. 6 Return to the device list Press the [VOL] knob. 7 Exit Function Setting mode Press the [ ] button for at least 1 second. . • This unit allows up to 8 digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 1 Select Special device registration mode For how to select setup item, refer to (page 20). Select “SETTINGS” > “DETAILED SET” (“DETAIL SET”) > “S-DVC SELECT” (“S-DVC SEL”). 2 Enter Special device registration mode Press the [VOL] knob. A list is displayed. 3 Select a device name Turn the [VOL] knob and press it when the desired device name is displayed. If “COMPLETE” is displayed, registration is completed. 4 Go through the procedure step 3 of and complete the registration (pairing). Cancelling Special device registrati...

Herunterladen

Geben Sie zwei Ziffern: