Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 5 Select the characters Press the [FM] or [AM] button. Characters can be entered by using buttons. Example: If "DANCE" is entered. Character Button #Times pressed "D" [#3] 1 "A" [#2] 1 "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - Internal CD player: 30 (KDC-MPV7020/6020)/ 10 (KDC-5020/5020R) discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. Function of the KDC-5020R TEL Mute The audio system automatically mutes when When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during Press the [SRC] button. The "CALL" display disappears ON. When the call ends Hang up the phone. The "CALL" display ON. — 11 — English English Auxiliary Input Display Setting Theft Deterrent Faceplate Selecting the display when this device is switched to Auxiliary The faceplate of the unit can be detached and taken with you, input source. helping to deter theft. 1 Select Auxiliary input source Removing the Faceplate Press the [SRC] button. 1 Press the Release button. Select the "AUX" display. Drop open the faceplate. 2 Enter Auxiliary input display setting mode 2 Drawing the faceplate to left side pull it to the front and Press the [DISP] button for at least 2 seconds. remove it. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • The faceplate is a precision piece of equipment and can be • "GAME" damaged by shocks or jolts. For that reason, keep the faceplate • "PORTABLE" its special storage case while detached. • "DVD" • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much 4 Exit Auxiliary input display setting mode dust or the possibility of water splashing. Press the [DISP] button. Reattaching the Faceplate • When operation stops for 10 seconds, the name selected, and Auxiliary input display setting mode 1 Align the shaft on the unit with the depression KDC-5020/5020R: faceplate. • This function doesn't work when CA-C1AX Function of the KDC-MPV7020/ Non-fading Output Turning the Non-fading 2 Push the faceplate Press the [NF] button The faceplate is Each time the button or OFF. When it’s ON, "NF — 12 — Tuner features Tuner features Tuning SRC FM MENU . LOUD DAB SCAN RDM REP M.RDM DISP OFF AUD NAME MENUPTY TI 4 AM #1 – 6 ST indicator Band display Frequency display Preset station number Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Direct Access Tuning (Function of remote) Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. 3 Enter the frequency Press the number buttons Example: Desired frequency Press button 92.1 MHz (FM) [#0], [#9], [#2], [#1] 810 kHz (AM) [#0], [#8], [#1], [#Canceling Press the — 13 — Tuner features Tuner features English Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] — [#6] button. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 "MENU" is displayed. 3 Select the Auto Memory Entry Press the [FM] or [AM] button. Select the "A-MEMORY" display. 4 Open Auto Memory Entry Press the [ 4] or [ . ] button for at least When 6 stations that Auto Memory Entry • When the
Car-Receiver - KDC-5020 (922.07 kb)
Car-Receiver - KDC-6020 (922.07 kb)
Car-Receiver - KDC-MPV7020 (922.07 kb)