Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 461.92 kb Dateiname: Unterrichtssprache:

You can arrange to have news bulletins interrupt listening source, including other radio stations. When Bulletin function is on, the PTY News Timeout setting you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes for each journey. Display and setting: "NEWS OFF/ 00M/ 10M/ 20M/ 30M/ 40M/ 50M/ 60M/ 70M/ 80M/ 90M" (M= minutes) : When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, "NEWS" will be displayed and reception will begin at the preset volume. NOTE • If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. • This function is only available if the desired station sends PTY-code for news bulletin or belongs to -Network sending PTY-code for news bulletin. • If you turn on the news bulletin function in the MW/LW band, the band is switched automatically to the FM band. However, the MW/LW band is not returned to when you turn off the function. — 22 — Local Seek NOTE With the local seek stations with relatively Display and setting: "LO.S ON": The local seek function "LO.S OFF": The local seek function Selecting Tuning Mode You can choose from three tuning modes: station seek, and manual. The “AUTO 1” indicator when auto seek tuning is selected, and the “AUTO lights when preset station seek tuning is selected. Display and setting: "AUTO 1": Auto seek tuning mode "AUTO 2": Preset station seek tuning mode "MANUAL": Manual tuning mode Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. Display and setting: 1 Select the display "A-MEMORY" during the selecting function in the menu system. 2 Hold down either the 4 or . button for two seconds or more to start auto memory function. The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. • When the AF function takes place, only RDS are stored. RDS stations also be preset in FM2 or FM3. • When the local seek function entry takes place, stations with • When the Traffic Information function information station frequency will be Cancelling Auto Memory Entry During Its Operation: Press the MENU button whilst auto memory place to stop the process. Recalling a Preset Station: Press the preset station button (#1-6) for the desired The number of the recalled station is displayed. AF (Alternative Frequency) Function When poor reception is experienced, automatically switch to another frequency broadcasting the same programme in the same RDS network with better reception. The . indicator lights up when the AF function is turned on. Display and setting: "AF ON": The AF function is on. "AF OFF": The AF function is off. NOTE • When no other stations with stronger reception are available for the same programme in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn off the AF function in such a case. • The AF function can be turned on or off even when the standby mode has been turned on. If the power is on, the AF function tunes in to stations that offer good reception. — 23 — Menu settings English Restricting RDS You can choose whether received with the AF specific region. When region is restricted. Display and setting: "REG ON": The Region Restrict Function "REG OFF": The Region Restrict Function NOTE Sometimes stations in the same network programmes or use different programme service Auto TP Seek Function When the TI function is on and poor reception conditions experienced when listening to a traffic information station, another traffic information station with better reception will searched for automatically. This function is on, when unit is first powered on. Display and setting: "ATPS ON": The Auto TP Seek Function is on. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station. "ATPS OFF": The Auto TP Seek Function is off. Monaural Reception When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. Display and setting: "MONO ON": The monaural reception is on. "MONO OFF": The monaural reception is off. Function of the KDC-4080R/KDC-4080RV Text Scroll This function permits and the entire text to be scrolling and automatic default is manual scrolling. Display and setting: "SCL AUTO": Automatic scrolling "SCL MANU": Manual scrolling — 24 — Accessories External view Number of 2 CAUTION .............................................

Herunterladen

Geben Sie zwei Ziffern: