Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Kenwood Dateigröße: 424.22 kb Dateiname: Unterrichtssprache:

3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting switches below. Speaker type Display 2 Enter clock adjustment Press the [CLK] button The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [ 4] or [ . ] button. 4 Exit clock adjustment mode Press the [CLK] button. Function of the KDC-4020/KDC-3020/KDC-2020 DSI (Disabled System Indicator) OFF "SP-F" A red indicator will blink on the unit after the faceplate For the OEM speaker "SP-O" removed, warning potential thieves. For 6 & 6x9 in. speaker "SP-6" 1 Turn the power OFF For 5 & 4 in. speaker "SP-5" Press the [SRC] button for at least 1 second. 4 Exit Speaker Setting mode 2 Set the DSI Press the [Q] button. While pressing the [#1] and [#3] button, press the [SRC] button. Each time the step 1 and 2 operation is done the DSI turns ON or Clock Display OFF. Press the [CLK] button. Each time the button is pressed the clock display turns ON or Function of the KDC-4020/KDC-3020/KDC-2020 OFF. When it’s ON, the clock indicator is ON. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Adjusting Clock Removing the Faceplate Press the Release button. 1 Select the clock display The faceplate is unlocked, allowing you to detach it. — 8— The faceplate is damaged by shocks its special storage case • Do not expose the faceplate or excessive heat or humidity. Also avoid places with too dust or the possibility of water Reattaching the Faceplate 1 Align the projections on the unit faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. Tuner features FM/ AM CRSC . 4 SRC #1 - 6 AUTO/ AME KDC-4020/KDC-3020/KDC-2020 ST indicator Preset station number CRSC indicator KDC-1020/KDC-1020S Band display Frequency display AUTO indicator ST indicator Band display Preset station number Frequency display AUTO indicator CRSC indicator — 9— Tuner features Tuner features Tuning Mode Choose the tuning Press the [AUTO] button. Each time the button is pressed mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual — Normal manual tuning control. Press the [FM] 2 Select the frequency Press the [ 4] or [ . ] button. 3 Put the frequency in the Press the [#1] — [#6] button The preset number display blinks On each band, 1 station can be put — [#6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1] — [#6] button. Station Preset Memory Putting the station in the memory. CRSC (Clean Reception System Circuit) Temporarily have reception switched from stereo to mono to 1 Select the band reduce multi-path noise when listening to the FM station. — 10 — CD/External CD/External Each time the button When it's ON, the "CRSC" DISC- DISC+ Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [#1] and [#5] button, press the button. KDC-4020/KDC-3020/KDC-2020 The frequency step changes to FM band 200 kHz, and AM Track number 10 kHz. • When the same operation is repeated, it returns to the original setting. • When the frequency step is switched, the frequencies in the memory are deleted. Track time REP RDM SCAN M.RDMSRC . 40 KDC-1020/KDC-1020S RDM indicator SCN indicator REP indicator Track time IN indicator RDM indicator SCN indicator REP indicator Track number IN indicator Disc number — 11 — CD/External CD/External Playing CD When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator Eject the CD Press the [ 0] button. 3 in. (8cm) CD cannot be played. Using an adapter them into this unit can cause damage. Reversing Hold down on the 4] button. Release your finger Track Search Selecting the song you want to Press the [ 4] or [ . ] button. Function of the KDC-4020/KDC-3020/KDC- Album Search (Function of disc changer) Function of the KDC-4020/KDC-3020/KDC-2020 Playing External Disc Pl...

Herunterladen

Geben Sie zwei Ziffern: