Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Kenwood Dateigröße: 315.68 kb Dateiname: Unterrichtssprache:

Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip while playing. Remove burrs using a ballpoint pen or a similar utensil. Burrs Burrs — 6— Do Not Load Do not use commercially accessories that can slot, such as stabilizers, CD cleaning discs, since they unit to malfunction. Removing the CD Only remove the CD from the machine a horizontal direction, holding it flat. You damage the surface of the CD if you try pulling it down as it ejects. Do Not Use Special Shape CDs • Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. COMPACT DIGITAL AUDIO • Be sure to use CDs with disc mark only for this unit. Do Not Use CDs with Sticker on the Labeled Side Do not use the CD with the label sticker stuck on it. Using such a CD may cause the CD to be deformed and the sticker to peel off, resulting in malfunction of the unit. General Power SRC/ Turning on the power: Press the SRC (source) NOTE #1-5 LOUD PWR OFF AME ADJ A.ADJ CRSC CLKSCAN RDM REP D.SCN M.RDM DISC DISC AUTO FM . AM 4 SRCSRC PWR OFF ATT/ LOUD u d AUD/ A.ADJ CLK ATT indicator LOUD indicator Turn the power on before carrying Turning off the power: Press the PWR OFF button for at Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. — 7— General English Switching Modes Switching Modes: Each time you press the switches as follows: Tuner mode CD mode External disc control mode 1 (KDC-4015/415S/315V/315S/35MR only) External disc control mode 2/AUX mode (KDC-4015/415S/315V/315S/35MR only) Standby mode Selecting standby mode: Press the SRC button repeatedly and switch to "OFF" When "OFF" is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • The AUX mode is available only when the changer / AUX switching adapter (KCA-S210A or CA-C1AX) or CD changer (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected to this unit. During the AUX mode, "AVin" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator Turning Loudness On/ Press the LOUD button loudness on and off. Audio Control Setting Adjust various parameters of sound quality. 1 Press the A.ADJ button for at least one second control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source ( CD, FM, AM and disc changer ) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are recalled automatically whenever you use that source ( for example, FM mode uses the tone settings made for FM, AM for AM, etc.) . 3 Adjust each mode Press the 4/ . button. Please refer to the following for the adjusting values. 4 Press the A.ADJ button to end the control mode. "BAS": Adjust the bass level. Setting values: - 8 - + 8 — 8— Function of the "TRE": Adjust the Setting values: - 8 - Mobile Preset This function allows with the sound coordinate speakers. 1 Press the SRC button repeatedly “ OFF” is displayed when the standby mode "BL": Adjust the balance level. 2 Press the AUD button to enter the mobile Setting values: Left 15 - Right 15 3 Press either the 4 or . button to select the type of speaker. The setting switches as follows. Flat / For the OEM speaker / For 6x9 in. speaker For 5 in. speaker 4 Press the AUD button to end the mobile preset plan Setting values: Front 15 - Rear 15 "FD": Adjust the fader level. NOTE When you change the setting of type of speaker, the bass treble tone settings are returned to original levels. ec4/dB (Sound Coordinate) You can recall the best audio setting preset for different types of the music. 1 Press the AUD button to enter the Sound Coordinate mode. 2 Press a preset button (#1-5). The preset settings of the bass and treble tones are recalled. #1: Flat #2: Rock #3: Top 40 #4:...

Herunterladen

Geben Sie zwei Ziffern: