Stimmen - 5, Durchschnittliche Bewertung: 4.4 ( )

Hersteller: Kenwood Dateigröße: 536.54 kb Dateiname: Unterrichtssprache:

Each time you press the button, the display alternates between clock display and current source. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Do not expose the faceplate to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. Projections Grooves 8 | English 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. English | 9 Tuner features Control knob ATTTIAME SRC1-6AME Band display Preset station number ST indicator Frequency display Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM I, FM II, and FM III bands. 3 Tune up or down band Push the Control knob towards [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [.]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. 10 | English Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. "A-MEMORY" is displayed. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the (page 19) is ON, only RDS stations are put in the memory. • When Auto Memory Entry is done in the FM II band, the RDS stations preset in the FM I band are not put in the memory. Likewise, when Auto Memory Entry is done in the FM III band, RDS stations preset in FM I or FM II are not put in the memory. Preset Tuning Recalling the stations in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Recall the station Press the desired [1] — [6] button. English | 11 RDS features Control knob ATTTIAME TI indicator Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. When traffic information is ON, "TI" indicator is ON. When a traffic information station is not being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed and the audio changes to traffic information. • During reception of an AM station when the Traffic Information function is turned ON, the frequency changes to an FM station. • During reception of traffic information the adjusted volume is automatically remembered, and the next time the audio changes to traffic information, the volume automatically becomes the remembered volume. 12 | English 1-6 TI PTY indicator Receiving other traffic information stations Push the Control knob towards [4] or [.]. • Traffic information can be switched when it is on the Tuner Source. However, you cannot switch the Traffic information during reception of the Traffic bulletin switched from the source other than the Tuner. PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the Control knob. During PTY mode the "PTY" indicator is ON. • This function cannot be used during a traffic bulletin or AM reception. 2 Select the Program Type Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Program Type alternates between the program types shown in the table below. No. Program Type Display 1. Speech "SPEECH" 2. News "NEWS" 3. Current Affairs "AFFAIRS" 4. Information "INFO" 5. Sport "SPORT" 6. Education "EDUCATE" 7. Drama "DRAMA" 8. Culture "CULTURE" 9. Science "SCIENCE" 10. Varied "VARIED" 11. Pop Music "POP M" 12. Rock Music "ROCK M" 13. Easy Listening Music "EASY M" 14. Light Classical "LIGHT M" 15. Serious Classical "CLASSICS" 16. Other Music "OTHER M" 17. Weather "WEATH...

Herunterladen

Geben Sie zwei Ziffern: