Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Kenwood Dateigröße: 501.94 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Car-Receiver - KDC-2026 (373.23 kb)

The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [ 4] or [ . ] button. 4 Exit clock adjustment mode Press the [CLK] button. Function of the KDC-3026/KDC-2026/KDC-226/KDC-226B DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Set the DSI While pressing the [1] and [3] button, press the [SRC] button. Each time the step 1 and 2 operation is done the DSI turns ON or OFF. Function of the Theft Deterrent The faceplate of the helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing • The faceplate is a precision piece of equipment damaged by shocks or jolts. For that reason, keep its special storage case while detached. • Do not expose the faceplate or its storage case to direct or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. — 8— Tuner features Tuner features CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD SRC 1 - 6AUTO/ AME Band display Preset station number Frequency display ST indicator AUTO indicator CRSC indicator Choose the tuning Press the [AUTO] button. Each time the button is pressed mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual — Normal manual tuning control. Tuning Tuning Mode Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF. When it's ON, the "CRSC" indicator is ON. CRSC (Clean Reception System Circuit) — 9— English English Station Preset Frequency Step Putting the station Changing the tuning The original setting is 1 Select the band Press the [FM] or [AM] button. 1 Turn the power OFF Press the [SRC] button for at 2 Select the frequency to put in Press the [ 4] or [ . ] button. 2 Switch the frequency step While pressing the [1] and [5] button, 3 Put the frequency in the memory The frequency step changes to FM band Press the [1] — [6] button for at least 2 10 kHz. The preset number display blinks 1 time. • When the same operation is repeated, it returns to the On each band, 1 station can be put in the memory setting. [6] button. • When the frequency step is switched, the frequencies in memory are deleted. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [1] — [6] button. — 10 — CD/External CD/External 4 DISC- DISC+ . CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD SRC SCAN RDM REP M.RDM SCN RDM indicator indicator Disc number Track number REP indicator IN indicator Track time When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator Eject the CD Press the [ 0] button. 3 in. (8cm) CD cannot be played. Using an adapter them into this unit can cause damage. Function of the KDC-3026/KDC-2026 Playing External Disc Playing discs set in the optional accessory disc player to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD-2" CD player "DISC" CD changer/ MD changer • Disc No. 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. — 11 — English English Fast Forwarding Track Scan Playing the first part Fast Forwarding to and searching for Hold down on the [ . ] button. Release your finger to play 1 Start Track Scan Reversing Press the [SCAN] button. Hold down on the [ 4] button. "SCN" indicator is ON. Release your finger to play the disc 2 Release it when the song you want Press the [SCAN] button. Track Search Selecting the song you want to hear. Press the [ 4] or [ . ] button. Function of...

Herunterladen

Geben Sie zwei Ziffern: