Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kenwood Dateigröße: 443.79 kb Dateiname: Unterrichtssprache:

• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. IMPORTANT INFORMATION About the disc connected: To connect a disc changer switch to this unit, set the . To connect a disc changer having switch to this unit, the converter and/or switching adapter KCA-are required as options. A disc changer doesn't work when it is connected without using these options. If a model with no "O-N" switch is connected, some unavailable functions and information that cannot be displayed are generated. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. — 4— NOTE • If you experience problems installation, consult your • If the unit does not seem right, try pressing the reset that does not solve the problem, your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operatin should be restored. Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Cleaning the If the terminals on dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the CD Slot As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD slot. Lens Fogging Right after you turn weather, dew or condensation the lens in the CD player lens fogging, CDs may be In such a situation, remove for the condensation to evaporate. still does not operate normally after consult your Kenwood dealer. — 5— About CDs About CDs s CD cleaning • Don’t touch the recording Clean from the center outward. English • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs CD accessories Don’t use disc type accessories. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CDs with coloring on the recording surface or that are dirty can’t be used. • Don’t use CDs without disc mark . • A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) CD storage • Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. — 6— General General (KDC-219/KDC-2019V/KDC-29MR/KDC-217/KDC-AM FM . 4ud SRC ATT/ #1 #3 CLK/ Q/ LOUD ADJ AUD KDC-219/KDC-2019V/KDC-2019/KDC-29MR/KDC-217/KDC- ATT indicator LOUD indicator ATT indicator LOUD indicator SYSTEM Q indicator KDC-119/KDC-119S Clock display Clock indicator Clock display Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at Selecting the Source Pre...

Herunterladen

Geben Sie zwei Ziffern: