Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Kenwood Dateigröße: 2.04 mb Dateiname: Unterrichtssprache:

2 Enter Audio Control mode Press the [AUD] button 3 Select the Audio Press the [FM] Each time the button is pressed the items that can be adjusted switch as shown below. 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "Bass"/ "BAS" –8 — +8 Middle level "Middle"/ "MID" –8 — +8 Treble level "Treble"/ "TRE" –8 — +8 Balance "Balance"/ "BAL" Left 15 — Right 15 Fader "Fader"/ "FAD" Rear 15 — Front 15 Volume offset "V-Offset"/ "V-OFF" –8 — ±0 Loudness "LOUD" ON/OFF Volume offset: Each source's volume can be set as a difference from the basic volume. 5 Exit Audio Control mode Press the [AUD] button. Speaker Setting Fine-tuning so that the System Q value is the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [System Q] button. 3 Select the Speaker Press the [ 4] or [ . ] button. Each time the below. — 6— Speaker type Speaker type OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4Inch"/ "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6Inch"/ "SP 6*9/6" For the OEM speaker "SP O.E.M."/ "SP OEM" 4 Exit Speaker Setting mode Press the [System Q] button. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Station name or Frequency "SNPS" (KRC-766/666/666G only) Frequency (KRC-766/666/666G only) "BAND+FREQ" / "BAND+F" Program Service name or Frequency (KRC-666R only) Radio text, "R-TEXT" Program Service name or Frequency (KRC-666R only) Clock Displaying the frequency reception (KRC-666R Press the [DISP] button The frequency for seconds instead In Tape source KRC-766 : Information Play side Play side & Tape counter Play side & Tape running Clock KRC-666R/666/666G: Information Play side Tape running & Tape counter Tape running Clock In External disc source Information Display Disc title "D-TITLE" Track title "T-TITLE" Track number & Play time "P-Time" /"P-TIME" Disc name "DNPS" Clock In Auxiliary input source Information Auxiliary input name Clock If the Disc title or Track title is selected when the disc not have disc title or track title are displayed. — 7— General features General features English Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station(KRC-766/666/666G only) or CD. 1 Receive/play the station/disc you want to attach a title to • A title can't be attached to a MD. • Refer to the (page 7) and select either "DNPS" or "SNPS". 2 Enter name set mode Press the [NAME.S] button for at least 2 seconds. "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the character type (KRC-766 only) Press the [ 38] button. Each time the button is pressed the character type switches as shown below. Character type 1 Select Auxiliary input source Alphabet upper case Press the [SRC] button. Alphabet lower case Select the "AUX1" display. Numbers and symbols 2 Enter Auxiliary input display setting mode Special characters (Accent characters) 5 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote buttons. Example: If "DANCE" is entered. Character Button Times pressed 7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. Press the [NAME.S] button for at least 2 The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed displays. • "AUX1" "D" [3] 1 • "TV" "A" [2] 1 • "VIDEO" "N" [6] 2 • "GAME" "C" [2] 3 • "PORTABLE" "E" [3] 2 • "DVD" — 8— 4 Exit Auxiliary input display setting mode 4 Exit Auxiliary input display setting mode When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display setting mode closes. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front and remove it. • The faceplate is a precision piece of equipment damaged by shocks or jolts. For that its special storage case while detached. • Do not expose the faceplate or or excessive heat or humidity. Also avoid places with too dust or the possibility of Reattaching the 1 Align the shaft faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. Function of the KRC-666R TEL Mute The audio system aut...

Herunterladen

Geben Sie zwei Ziffern: