Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 480.33 kb Dateiname: Unterrichtssprache:

Recalling a Preset Station: Press the preset station button (#1-6) for the desired The number of the recalled station is displayed. NOTE You can store six stations in each of the FM1, FM2, FM3, and bands. Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. 1 Select the band for auto memory entry. 2 Press the AME button for at least two seconds to start auto memory entry. The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. Recalling a Preset Station: — 10 — Press the preset The number of the Assigning Names Press the NAME.S 6 The name of the station Name Preset mode ends. Also, if you make no input Station Name Preset You can assign names to radio Memory. Up to 32 FM stations and assigned names. 1 Adjust the frequency to the station whose enter. 2 Press the NAME.S button for at least two seconds. "NAME SET" is displayed once the station name preset entered. The cursor will blink in the position where letters are entered. 3 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the . button to the right. 4 Each time the 38 button is pressed, the characters to be entered change as listed below. Press the FM or AM button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z (KRC-608 Only) Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ] Special characters: aaeeiioouuNC®.‹ fl aaeeiioouunc©.› fi (KRC-608 Only) 5 Continue steps 3 and 4 until all the characters are chosen for the name. stored up to the point that you ends. NOTE • You can assign names to up to 32 FM stations. • All the station names will be erased if you button. • If you want to change the name of a station, first name of the station (following steps 1 and 2 above), change the letter(s) that you want by following steps Switching Display for Tuner You can change the display used when listening to the radio. Changing the Display: Each time you press the DISP button, the display changes as follows: Station frequency SNPS name (only when being preset) Clock Date NOTE The . indicator lights while the clock is displayed. NOTE You can enter up to 8 characters for each name. — 11 — Cassette Playing Cassette English 4 FM SRC PROG 0 EJECT PWR OFF LOUD MENU AUTO AME DISP NAME.S SCANB NR B.S/RDM REP D.SCN MTL/M.RDM DISC DISC DAB PROG . AM AUD DISPMTLREP B.S B NR Release button KRC-608 Tape side Tape running display MTL indicator B NR indicator IN indicator KRC-508S Tape side Tape running display MTL indicator B NR indicator . indicator Loading and Playing Press the release button the cassette insertion slot. Holding the cassette with the it in the slot. The tape will start Push back the bottom of the faceplate locks. The IN indicator lights up when a cassette has 2CAUTION When inserting a cassette make sure the cassette completely drawn in before pushing back the do so might deform the tape. Playing Cassettes Already Loaded: Press the SRC (Source) button repeatedly to select the mode. "TAPE" is displayed when the tape mode has been selected. The tape will start playing. Listening to the other side: Press the PROG button. Tape play switches to the other side. Ejecting Cassettes: Press the release button and slide open the faceplate. Press the 0 button. The tape stops playing and the cassette ejects. Push back the bottom of the faceplate with your hand until it locks. 2CAUTION • When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. • Do not use the unit with the faceplate in the open condition. Doing so will cause breakdown. NOTE • Remove a cassette from the unit when not listening to it for a while. If you leave it in the unit too long, the tape may stick to — 12 — the tape head • The only buttons 0 and ATT buttons. Fast Forwarding and Rewinding Fast Forwarding Tapes: Press the FM button. Rewinding Tapes: Press the AM button. Canceling: Press the PROG button. Normal tape play will begin. Using Direct Skip forward or backward Skipping to Beginning (Rewind DPSS): Press the 4 button. Press once to rewind to the beginning twice to rewind to the beginning forth. You can skip up to nine tracks. Playback is continued after the tape is rewound indicated number of tracks. Skipping to Later Tracks (Fast Forward DPSS): Press the . button. Press once to fast forward to the next track, twice forward to the track after that, and...

Herunterladen

Geben Sie zwei Ziffern: