Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 372.41 kb Dateiname: Unterrichtssprache:

2 CAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. Cleaning the Tape Head After you have used times over a long period, from the tapes and dust tape head, causing noise in sound quality. Clean the tape cleaning tape or cleaning kit designed in car audio systems. Handling Cassette Tapes • Do not play a cassette whose tape has gone slack. In such a case, wind it tight using a pencil or the like in one of the spools. Playing slack cassette tapes can result in the tape tangling around the capstan and/or pinch rollers, causing trouble. • Do not play a deformed cassette or one whose label is starting to come off, as it can cause the unit to malfunction. • Do not leave tapes in hot places, such as above the fascia panel (dashboard) and other spots exposed to direct sunlight, or near heater outlets. They can deform the cassette. • Avoid using extremely long cassette tapes, such as 100-minute-long tapes. Such tapes are very thin, and can tangle easily around the pinch rollers or other parts inside the unit, causing unit failure. • Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction. — 4— General features Release button SRC / d uATT 4 AUDPWR OFF FM SRC PWR EJECT OFF / PTY MENU TI VOL ADJ CLK LOUD NAME.S SCAN B.S/RDM REP D.SCN M.RDM DISC DISC AM Power Turning on the power: Press the SRC button. NOTE ATT / LOUD #1 – 5 CLK LOUD indicator ATT indicator Turn the power on before carrying Turning off the power: Hold down the PWR OFF button for Volume Increasing Volume: Press the ubutton to turn up the volume. Decreasing Volume: Press the dbutton to turn down the volume. — 5— General features English Switching Modes Switching Modes: Each time you press the follows: t Tuner mode t Tape mode t External disc control mode 1 t External disc control mode 2/AUX mode t Standby mode Selecting the standby mode: Press the SRC button repeatedly to select to "ALL OFF" When "ALL OFF" is displayed, the standby mode is turned The standby mode turns all functions off although leaving the unit’s power on. Use this mode when you want to have the display illuminated but do not want to listen to anything. Turning Attenuator On/Off: Press the ATT button When the attenuator When the attenuator level. NOTE Turning the volume up, or turning the attenuator function. Loudness This function amplifies low and high tones when turned down. The LOUD indicator lights up, when the loudness on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • The AUX mode is available only when the changer / AUX switching adapter (KCA-S210A or CA-C1AX) or CD changer (KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected to this unit. During the AUX mode, "AUX" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. Attenuator This function allows you to turn down the volume quickly. Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source (tape, CD, MD, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses — 6— the tone settings Adjust each mode Press the 4/ . button. 3 "BAL" : Adjust the balance level. Setting values: Left – Right 15 Please refer to the following Press the AUD button to end 4 "EC"/"dB" : Recalling the kenwood preset sound setting Press the preset buttons (#1-5). Settings: #1;FLAT, #2;ROCK, #3;POPS/TOP40, #4;JAZZ, #5;EASY NOTE You can call the following settings with this function; frequency, bass level, bass quality factor, bass extension, centre frequency, and treble level setting. "BAS" : Adjust the bass level. Setting values: - 8 – + 8 "TRE" : Adjust the treble level. Setting values: - 8 – + 8 "FAD" : Adjust the fader level. Setting values: Front 15 – Rear 15 Clock display Turning clock display On/Off: Each time you press the CLK button, the display switches between the clock and each mode display. — 7— General features TEL Mute damaged by shocks in its special storage Shut down the audio incoming call is received. NOTE English The function will not work if phone. When the telephone rings: When a call is received, "CALL" is displayed functions ar...

Herunterladen

Geben Sie zwei Ziffern: