Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Kenwood Dateigröße: 475.88 kb Dateiname: Unterrichtssprache:

The function setting is indicated by " COL GRN" or "COL AMB" in the display, indicating that the current colour respectively. 3 Switching settings Press either the AM button or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. Clock display — 25 — Other features Audio Control Adjusting Time English Adjust various parameters 1 Press the AUD button 2 Press either the FM or AM Each time the button is pressed, change as follows: Pressing the FM button advances AM button reverses it. Bass Fader Treble Balance NOTE Source tone memory Each source (tape, FM, AM, and disc changer) has its memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Press the 4/ . button. Look at the table to adjust the mode being displayed. With automatic time automatically according (after receiving RDS signals set the time manually if is turned off. The factory default Adjusting Time Automatically: Tune into an RDS station for 3 or 4 The time adjusts automatically to the NOTE The time is not adjusted when the RDS station not transmitting a time signal. Choose another such a case. Turning Automatic Time Adjustment On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the . button repeatedly until the Automatic Time Adjustment function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "SYNC ON" or "SYNC OFF" in the display, indicating that the Automatic Time Adjustment is on or off, respectively. "SYNC ON" (Automatic time adjustment) "SYNC OFF" (Manual time adjustment) 3 Switching settings Press either the AM button or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. Adjusting Time Manually:1 Turn off the Automatic Time Adjustment as mentioned above. 2 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 3 Press the . button repeatedly until the "CLK ADJ" appears in the display. Press the 4 button to search in the other direction. Adjustment Operation of Audio control buttonmode (Display) 4 button . button Bass ("BAS") Bass increased. Bass decreased. Treble("TRE") Treble decreased. Treble increased. Right channel emphasized. Left channel emphasized. Balance("BAL") Rear channel increased. Fader ("FAD" ) Front channel increased. 4 Press the AUD button to end the control mode. — 26 — 4 Hold down either more to enter the The time display will 5 • Adjusting the hours Press the FM button to advance button to make the hours go • Adjusting the minutes Press the . button to advance the minutes, or 4 button to make the minutes go back. 6 Press the MENU button to end the menu TEL Mute Shut down the audio system temporarily whenever incoming call is received. NOTE The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from the display, and the volume of the original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually. Touch Sensor This function produces operation. It can be Turning the Beep On/Off: 1 Hold down the MENU button "MENU" is displayed and the menu 2 Press the . button repeatedly until the Touch function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "BEEP the display, indicating that the current beep respectively. 3 Switching settings Press either the AM or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. NOTE The beep sound is not output from the preout jacks. Navigation Mute Function When the KENWOOD Navigation System is connected, an interruption of the audio guide results in the temporary lowering of the audio level. NOTE The Navigation mute function cannot be used unless a TEL mute cable is connected to the KENWOOD Navigation System. — 27 — Other features English Disabled System A red indicator blinks warning potential thieves. is "ON". Turning Disabled System Indicator On/Off: 1 Hold down the MENU button "MENU" is displayed and the menu 2 Press the . button repeatedly until the Disabled Indicator function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "DSI ON" display, indicating that the disable system indicator respectively. 3 Switching settings Press either the AM button or FM butto...

Herunterladen

Geben Sie zwei Ziffern: