Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Kenwood Dateigröße: 257.28 kb Dateiname: Unterrichtssprache:

2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source ( tape, CD, MD, FM, AM and disc changer ) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are recalled automatically whenever you use that source ( for example, FM ec4/dB (Sound Coordinate) mode uses the tone settings made for FM, AM for AM, etc.). You can recall the best audio setting preset for different types 3 Adjust each mode of the music. — 6— Press the 4/ . button. Please refer to the 4 Press the AUD button “BAS”: Adjust the bass level. Setting values: - 4 – + 4 “TRE”: Adjust the treble level. Setting values: - 4 – + 4 2 Press the AUD 3 Press either the 4 or . button to select the speaker. The setting switches Flat / For the OEM speaker / For 5 in. speaker 4 Press the AUD button to end the NOTE When you change the setting of type treble tone settings are returned to original Clock display Turning clock display On/Off: Press the CLK button to switch the clock display on and off. The . indicator lights while the clock is displayed. “BL”: Adjust the balance level. Setting values: Left 15 – Right 15 “FD”: Adjust the fader level. Setting values: Front 15 – Rear 15 Function of the KRC-408 Mobile Preset This function allows you to adjust the setting that is recalled with the sound coordinate system, according to types of speakers. 1 Press the SRC button repeatedly to select the standby mode. “ OFF” is displayed when the standby mode is selected. — 7— General English Theft Deterrent The faceplate of the helping to deter theft. Projections Release button Grooves Removing the Faceplate: Press the release button. The faceplate is unlocked, allowing you to detach display the time. 2 Press the CLK button adjustment mode. The 3 • Adjusting the hours Press the FM button to advance button to make the hours go • Adjusting the minutes Press the . button to advance the minutes, or 4 button to make the minutes go back. 4 Press the CLK button to end the clock adjustment NOTE • The faceplate is a precision piece of equipment and can damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate: 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. Adjusting Time Adjust the time. 1 When the time is not displayed, first press the CLK button to — 8— Tuner features Tuning 4 SRC FM/CRSC . SRC EJECT SCAN B.S/RDM REP DISC DISCLOUD PWR OFF A.ADJ B NR D.SCN MTL/M.RDM CRSC AUTO AME ADJ CLK #1~6 AMAUTO/AME Preset station number indicator ST indicator Frequency AUTO indicatorBand display You can choose between frequencies and manual 1 Press the SRC (source) button mode. “ TUnE” is displayed when the tuner selected. 2 Press either the FM or AM button Each time you press the FM button, between FM1, FM2, and FM3 (which preset stations) . Press the AM button to select the AM band. 3 Press the AUTO button to switch between auto and manual tuning. The AUTO indicator lights up only when auto seek tuning selected. 4 • Auto Seek Tuning Press the . button to seek higher frequencies. Press the 4 button to seek lower frequencies. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step. NOTE The ST indicator lights up when stereo broadcasts are being received. — 9— Tuner features Station Preset Clean Reception English Store the frequency station with a single 1 Select the band/ station that 2 Press the button (#1-6) that you at least two seconds. The button number blinks once in the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for The number of the recalled station is displayed. NOTE You can store six stations in each of the FM1, FM2, bands. Temporarily have reduce multi-path noise The factory default for Turning CRSC On/Off: Press the CRSC button for at function on/off. The indicator lights up when CRSC is on. NOTE Strong electrical fields (such as from power unstable sound quality when CRSC is turned situation, turn it off. Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. 1 Select the band for auto memory entry. 2 Press the AME button for at least two seconds to start auto memory entry. The numbers of the prese...

Herunterladen

Geben Sie zwei Ziffern: