Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• To return to the control screen, press RETURN. To select a playback mode/change the speed of the Audiobooks 1 While control screen is displayed... Playback mode selection screen appears on the category list section of the control screen. 2 Select an item. 3 Select a playback mode/speed. REPEAT: RANDOM: AUDIO BOOK: REPEAT ONE Same as “Repeat One”. REPEAT ALL Same as “Repeat All”. RANDOM ALBUMS* Same as “Shuffle Albums”. RANDOM SONGS Same as “Shuffle Songs”. NORMAL Plays at normal speed. FASTER Plays faster. SLOWER Plays slower. * Functions only if you select “All Albums” or “All” in “Albums” of the main “MENU”. Continued on the next page English | 27 4 Confirm the selection. • You can also change the settings from the PSM (Preferred Setting Mode) items. See “AudioBooks” on page 27. 28 | KDV-MP6339U/KDV-MP6439U Listening to the other external components You can connect an external component to: • AV-IN (video) input jack on the control panel. Preparation: Make sure to connect and turn on the monitor to watch the playback picture. If the parking brake is not engaged, “Parking Brake” appears on the display and no playback video on the monitor. For connection, see Installation/Connection Manual (separate volume). • LINE IN terminals on the rear of this unit. 1 Select “LINE IN,” or “AV IN”. 2 — Turn on the connected component and start playing the source. 3 Adjust the volume. 4 — Adjust the sound as you want (see pages 31 and 32). Continued on the next page English | 29 Connecting an external component to the AV-IN input jack AV mini plug cable CA-C3AV (not supplied) AV mini plug cable (supplied) Portable Video/Audio player * Portable Video/ Audio player * or • When the supplied AV mini plug cable and commercially-supplied .3.5 mini plug cable (male – male) are used, a noise may be generated during source switching. * Portable Video/Audio player of this pin-allocation can be connected: 1 2 3 4 Audio (R) GND Video Audio (L) Camcorder Video GND Audio (R) Audio (L) iPod, etc. GND Audio (R) Audio (L) AUX 30 | KDV-MP6339U/KDV-MP6439U Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 Select “EQ”. 2 Select “On”. • If “Bypass” is selected, you can listen to the original sound mode recorded. lights up on the display. 3 Select a preset sound mode. Preset value setting for each sound mode Sound mode USER ROCK CLASSIC POPS HIP HOP JAZZ Preset value Band 1 (100 Hz) 0 +3 +2 0 +4 +3 Band 2 (320 Hz) 0 Band 3 (1 kHz) 0 Band 4 (3.2 kHz) 0 Band 5 (10 kHz) 0 +2 0 +1 +1 +2 0 +1 0 +1 0 +1 +2 +1 –2 0 +1 +2 +1 +2 +2 Adjusting the sound 3 Adjust the selected setting item. A Fad/Bal (Fader/Balance) You can adjust the sound characteristics to your 1 Press number button 1 ( ) preference. to move to the “Fad/Bal” adjustment • When is shown on the display, you can display. move back to the previous screen by pressing number 2 Adjust the speaker output balance by button 3 or 6. pressing: 1 5/ .: between the front and rear speakers. [F6 to R6] 4 /. : between the left and 2 right speakers. [L6 to R6] B Subwoofer 1 Press number button 1 ( ) to move to the “Subwoofer” adjustment display. 2 Use 4 /. to select a cutoff frequency to the subwoofer. • For “EQ” setting, see above. • Off *: All signals are sent to the subwoofer. Continued on the next page English | 31 • 55Hz: Frequencies higher than 55 Hz are cut off. • 85Hz: Frequencies higher than 85 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] 4 Press number button 1 ( ) to move to another setting level. 4 /. : select the quality of LPF. [–12dB/oct or –24dB/oct] Control dial: Turn the control dial to select the subwoofer phase. [0deg (normal) or 180deg (reverse)] * If “Off” is selected in step 2, you can only adjust the subwoofer phase. C Hi Pass (Hi Pass Filter) Turn the control dial to select the cutoff frequency to the front/rear speakers. Set this to match the LPF setting. • Off: All signals are sent to the front/rear speakers. • 62Hz: Frequencies lower than 62 Hz are cut off. • 95Hz: Frequencies lower than 95 Hz are cut off. • 135Hz: Frequencies lower than 135 Hz are cut off. D VolAdjust, [–5 to +5] Turn the control dial to adjust the input level of each source (except FM). Adjust to match the input level of the FM sound level. • Before making an adjustment, select the source you want to adjust. E Loudness, [Off or On] Turn the control dial to select “Off” or “On”. When “On” is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level. 4 Exit from the setting. Storing your own sound modes You can adjust the sound modes and store your own adjustments in memory. • When is shown on the display, you can move back to the previous screen by pressing number button 6. 1 2 Select a sound mode. 3 Select a frequency range to adjust. 4 Adjust the sound elements of the selected frequency range...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - KDV-MP6439U (3.17 mb)